print.fun

$PRINT is a P2E launch platform on $ETH that combines the best of GameFi and paper trading into one package. Available on @telegram.

study

[print.fun @printdotfun]

We are live: $PRINT V2 CA: 0x6761507Eb06cEdC7c000205b580bEd7B34A5B2ED

https://t.co/2H8Ti46vnc

[print.fun @printdotfun]

$PRINT Migration Bridge from V1 to V2 is live! You can use it at the moment of launch. https://t.co/Bl0J1nq8dy

It costs nothing for you to migrate. Simply connect to the dApp with your wallet that held V1 at the time of the snapshot and press launch migration to receive your tokens in seconds.

You can only migrate your tokens once, of course. V2 is already live, so check the contracts.

$PRINT V2: https://t.co/5EJI0hwxgg

[print.fun @printdotfun]

Printers! The V1->V2 Migration Guide is going live in an hour.

The process is extremely easy and quick on our web app. Meanwhile it's good to remember to watch out for any fake addresses, the V2 is deployed by the same deployer as V1!

Launch itself is in 3 hours. We will open chat one hour prior. Join us at https://t.co/VOd1IQCrCY.

[print.fun @printdotfun]

@chihung1024 Can you send your Telegram handle in DM

Currently team just opened community chat and is answering questions for a couple hours.

[print.fun @printdotfun]

$PRINT is back 🖨️

Some major news about to drop. The team has kept working all this time, apologies for the last week launch being moved to this week due to illness!

V2 is here in full force. Read the details from the post above.

[print.fun @printdotfun]

⚠️ Attention Printers!

The $PRINT migration will be handled through a Smart Contract to assure absolute fairness to all holders who are part of the snapshot.

After a thoughtful process we decided this would be the best for everyone. Please take your time to study the CA and instructions.

Contract Address will be shared here before re-launch so that all holders can claim their tokens at an equal time. Not all holders and tokens would fit in the same airdrop.

A common question we have gotten is if you do not have the private key of the wallet in cases when it is a bot or a sniper, we will of course migrate the tokens for you. Such cases will be handled by the team after re-launch.

More news coming!

[print.fun @printdotfun]

⚠️ Attention Printers!

We are aiming for the $PRINT re-launch for next week. Keep following us and don't lose hope even if the market is bad, we are working for your interests.

More information will follow, follow our Telegram for latest news quicker.

[print.fun @printdotfun]

🖨 Attention Printers!

A big part of our team is now working on the https://t.co/IEQ7bcaYFa wallet that contains your paper trading capital. pETH bought through the faucet will be credited there. Meanwhile, a lot of quality updates are being worked on and deployed live.

We have been rolling out UI updates and will continue to build up the platform to what the idea deserves. Check it out once in a while to see our progress!

To re-iterate, https://t.co/IEQ7bcaYFa is not a https://t.co/1ElGooswt1 style fork on ETH. The right word to use is inspiration. The mechanisms and the goals are different. Explaining this to users in a simple way through the platform is crucial.

The team is here to build something that will last. Keep following our update channels to keep up to date with next steps!

[print.fun @printdotfun]

FAQ

Q: When is the relaunch?
A: Early next week, when hopefully the meta of pump fun style platforms has calmed down a bit and https://t.co/IEQ7bcbwuI can succeed as a unique and interesting project, not just something to rotate to.

Q: How will you launch?
A: 1:1 token ratios for market holders. You will be able to claim your tokens on the dApp from the $PRINT wallet

Q: Will pETH be migrated too?
A: Yes of course.

Q: What went wrong with the launch?
A: Rotation of on-chain buyers to projects they thought similar. A few scammy KOLs dumped their bags, causing even more panic sells. All in all normal buyers decided to exit, and the lower we went the more it escalated.

Q: Will you release with full utility?
A: Yes, we'll finish the platform and then relaunch with it. Usually there is no point in launching with a full utility, building is part of the process. But as people seem to think it is necessary for the sake of competition, we can do that.

Team is sorry we could not stop this but many factors were out of our hands. We attempt our best to make it right with the relaunch!

[print.fun @printdotfun]

GM Everyone!

Unfortunately, with the current https://t.co/1ElGoot4iz narrative exploding, $PRINT had an excellent start but suffered from on-chain buyers rotating to other similar projects.

Fortunately, we have taken snapshot 1:1 of all holders and are planning to re-launch shortly with our full utility live at launch.

We believe with our utility fully live at launch, we can capture a significant amount of volume and liquidity from this narrative.

Thank you for all the support, PRINTERS.

Join to get latest news:
https://t.co/Gi3F9lVxwH

[print.fun @printdotfun]

⚠️🖨 Attention Printers!

https://t.co/IEQ7bcaYFa has released the first iteration of the print swap that includes a top-notch custom chart integration, @Uniswap off-chain simulating mechanism, and many other complex and intricate details for you to make the most out of your trading experience.

The most common question was wen. Now it is how. Just tap any of the projects which we've multiplied to showcase loading, and it will take you to the $MCAT project. Read the previous posts and updates to see what we are after with just the one project to teach people trading with https://t.co/IEQ7bcaYFa.

There will be many bugs and many flaws in both UI and operation, but all funds are safe, don't worry about that. Updates will be coming in almost hourly so do not get worried if something suddenly changes. We are building on top of what is being built.

Go have a look at the first alpha build and see how fast our team progresses to deliver https://t.co/IEQ7bcaYFa in its final and unique form. As a reminder, https://t.co/IEQ7bcaYFa is not a competitor to https://t.co/1ElGooswt1 or any clones on ETH.

⛔️ We see the https://t.co/1ElGooswt1 model as intrinsically flawed; we do not want to copy it. The $PRINT model is completely different. Study the whitepaper for details. https://t.co/hKLgEQwdiJ

[print.fun @printdotfun]

🖨 Attention Printers!

New https://t.co/IEQ7bcaYFa features are going live tonight and we hope for the video tutorial to be ready by the end of today as well. Keep in mind our today might be different to yours, but it is close.

Before trying out the new features, please watch the video even though there is not yet risk of losing any money, it is best to know what you do before you do it.

We will not disappoint you! Claim some pETH through your $PRINT holdings from the faucet now to be stacked when trading begins. https://t.co/tE5TCOumJF

[print.fun @printdotfun]

Attention Printers! The faucet is now optimized for holders. See it at https://t.co/tE5TCOumJF.

$PRINT holders only need to connect their wallet to the platform to verify their holdings. Upon claiming, the timer will be 12 hours instead of 24 hours for those with 25 000 $PRINT or more.

The team settled at 25 000 $PRINT (approximately $300 as of the time of writing) to be a fair starting amount for the boost. More features for larger and smaller amounts of $PRINT held are coming out soon for the https://t.co/IEQ7bcaYFa platform!

The platform is built around the $PRINT token and serves as the ultimate use case. Expect even more rapid updates coming out soon!

Don't understand the platform or use case? Join https://t.co/VOd1IQCrCY and let our active developers and mods explain it to you one to one!

[print.fun @printdotfun]

🖨⚠️ Attention Printers!

To prepare for the opening of trading on the https://t.co/IEQ7bcbwuI platform, you can now see your pETH (printed ETH, the cost-free paper trading wrapper for ETH) holdings on the platform.

pETH (printed ETH) is the in-platform currency for paper trading, enabling you to get airdrops when projects go live if you hold them and makes you eligible for trading rewards in stablecoins!

Check how much you have at any point in time using the faucet or by selecting a project and going into https://t.co/IEQ7bcbwuI Swap View.

More awesome updates are rolling out as we speak. Follow us on socials and share with your friends!

[print.fun @printdotfun]

Good news for $PRINT! 🥳

We are excited to announce that the expected launch date for https://t.co/IEQ7bcaYFa launches is the middle of the week. However, the platform will kickstart with a couple pre-approved launches to teach the users the capacities and features of the platform. All of these launches will be non-profit!

Some things about https://t.co/IEQ7bcaYFa which you should know when we go live!

- pETH (printed ETH) can be claimed for free from the faucet at https://t.co/tE5TCOumJF
- You can also purchase it at a very favourable ratio
- https://t.co/IEQ7bcaYFa is the only platform on ETH where launching is totally free (and fun!)
- There is no other launch incubator that allows you to without risk earn rewards while hunting the next gems

For more news and updates, join https://t.co/VOd1IQCrCY.

[print.fun @printdotfun]

⚠️ Attention Printers!

The next https://t.co/IEQ7bcaYFa update will enable you to trade launched projects real time with your pETH (printed ETH) and win rewards! The generated revenue of the platform will immediately be utilized for providing liquidity for launches that have reached their market cap goal.

A custom-built, @tradingview-based chart system and an exact and accurate off-chain simulation of UniSwap is being implemented with incredible success. You'll see it in action soon, prepare to get addicted!

After the successful launch of the $PRINT token, the team is focusing on delivering the platform at record speeds. The team behind https://t.co/IEQ7bcaYFa is dedicated to make it the best platform on ETH for incubating small and mid-size launches and with the right tools for adoption, we can do it.

With our unique paper trading concept and P2E features, users can flock into the platform and begin trading the first approved projects by the very middle of the week.

Study more at https://t.co/LCRrdJtaYp and look out for the intensive updates being rolled out!

[print.fun @printdotfun]

The $PRINT team has done over $10,000 in buybacks since launch 7 hours ago.

🖨 To support the projects great launch, we have executed a total of 4 ETH ($10,166.64) worth of buybacks just on the first day.

We use the ENS printfun.eth for such actions. Please note it is safe to send ETH to this address only from the https://t.co/tE5TCOumJF so it sends us a signal to send you printed ETH.

The supply bought back by team will be used for staking and ultimately be burned or used for CEX liquidity.

Congratulate yourself for getting in early, and we will continue the journey together tomorrow. During the night, our developers will be dropping more updates on the platform to prepare for the opening of trading.

Buyback TXs:
https://t.co/plzdIf9vcO
https://t.co/N2EDOHOPIm
https://t.co/GbNDRtbDah
https://t.co/zMnV8N0laH
https://t.co/bVzIunrYUB

[print.fun @printdotfun]

$PRINT is now officially verified on @DEXToolsApp!

👏 Thanks to their team for swift cooperation. You can find the latest confirmed information about the https://t.co/ZaFB3cOdUA project from the link below:

https://t.co/rGwz6Rt1I2

[print.fun @printdotfun]

⚠️🖨Attention Printers!

What a successful and great launch. We are proceeding with all the steps required, including listing details to @CoinMarketCap and @coingecko.

While the other part of our team has been doing that, the devs have been working. The platform is getting massive UI upgrades along with more functionalities and features.

➕ Once these are complete, launching and trading on https://t.co/IEQ7bcbwuI will start. Bookmark our @telegram Mini App, @printfunbot, to get personalized notifications when that happens.

📱 Follow us on all socials as well if you still have not. A quick clarification about the printed ETH: this will be credited to everyone's account who has claimed or bought it and will be used for trading on the platform.

More updates will follow.

[print.fun @printdotfun]

$PRINT is now verified on @dexscreener with all socials and links.

👏 Thanks to our diligent team members for getting things done in record timings.
https://t.co/oXNvfcBAc3

Study more at https://t.co/IEQ7bcbwuI. We are proceeding with the usual steps of launch and will inform about the platform itself launching soon.