protoflow, 6 months later...
one prompt → schematic with real parts → routed board → spice sim run by the ai
edit any of it by hand, pull up datasheets next to your schematic, export to kicad or altium
free on windows, mac and linux
@GianPaJ@lokutorAI Do STT and TTS stay resident together in the 8 MB PSRAM, or do you swap them between listening and speaking? Peak memory during that handoff seems worth measuring before adding the LLM.
@erikcorry A quarter-wave LUT saves memory if you mirror the address and flip the sign. Keeping the phase accumulator wider than the table address lets you tune frequency without growing the table.
@furan Are you clipping the bitmap against solder-mask openings on export? Keeping the pad clearances tied to the board data would save redoing the artwork after a footprint change.
@marqueztronics Have you checked the inductance estimate against a simple loop with a known analytical result? That would be a useful sanity check before trusting the multilayer cases.
@HarishKotra Does the replay protection survive a power cycle between approval and signing? That reset boundary is worth testing alongside the hostile-host firmware swap.
Engineers in 2010 vs 2026 🎮
Same wireless controller. 48 parts, 138 connections. Claude routed it in ProtoFlow Studio in 22 minutes, with 0 KiCad DRC errors.
Manual routing is a re-creation; the build-up is sped up. Design only, not hardware-tested.
https://t.co/kxspRFL0yv
16,000+ open source boards, now in ProtoFlow.
HackRF. The Corne keyboard. NASA's open source rover. Plus drones, synths, power supplies, retro computers, and a lot of weird stuff in between.
Open one, ask the AI how it works, fork it, build your own.
The future of hardware is open source.
Today we added a bunch of open sourced PCB reference designs to our website.
click edit in protoflow and start making changes in the app. The AI can explain the design choices, add features, and help you make the project your own.
or download a verified reference design directly from a manufacturer
@BatDevDale Does the reading stay steady with the knob untouched? A small deadband can stop the displayed volume flickering without slowing down larger adjustments.
@jc50000000@NousResearch Have you tried Wi-Fi reconnects while the display is refreshing? That's a useful stress case for catching supply dips that a first-boot test misses.
Same flight controller. 184 connections.
Claude routed it in ProtoFlow: 4 layers, 82 parts, 0 DRC errors in KiCad.
Manual side is re-created; AI footage sped up. Design only, not hardware-tested.
Engineers in 2010 vs 2026 😅
https://t.co/kxspRFL0yv
Imitation is the sincerest form of flattery, I guess 😂
Same layout. Same UX. Even the exact same Flux green.
You guys could have at least picked a different color 💚
Vibe coded a KiCad plugin to find the stock of any LCSC + Digikey + Mouser part so you don't have to spend time switching between 30 tabs and finding inventory.
Check it out here: https://t.co/AlTnQmAj2N