Rolla-V

UK manufacture of Press Brake Tooling
For Details on tooling or Bending Help email sales@
Our Factory

[Rolla-V @rolla_v]

Here is a view into how the premier UK Press Brake Tooling manufacturer produces the extraordinary Rolla-V dies from raw material to finished item ready to dispatch across the world. #ukmfg #pressbrake #rollav #mfg #factory
https://t.co/IUIurDHmux

[Rolla-V @rolla_v]

Not all Press Brake jobs call for a straight 90° bend, some have to taper off to nothing, meaning it gradually diminishes in size towards the end of the material, most standard dies will have no grip and the material slips. Not with a Rolla-V
#rollav #pressbrake #pressbraketool

[Rolla-V @rolla_v]

Press Brake Operators/Estimators, How would you bend this ? We used a Rolla-V RVHD3, the one flange is not a solid, it only has 3 fingers as support.
Impossible jobs may not be that difficult
#rollav #pressbrake #pressbraketool #pressbraketools #pressbraketooling #sheetmetal

[Sheet Metal Industries @SMIUK_]

What's Your Angle?

The series continues, this time with Rolla-V.

Fresh from a busy MACH 2026, the team shares what they're all about, the difference they're making, and why clients keep coming back.

A quick listen, packed with insight. Get Rolla-V's angle!

[Rolla-V @rolla_v]

30 Seconds to show you that investing in a #rollav is money well spent. Bending by a hole compared to standard air bending
#pressbrake #pressbraketool #ukmfg #sheetmetalwork

[Rolla-V @rolla_v]

Nice little certificate given at the end of @MACHexhibition by Jas @SMIUK_

#rollav

[Rolla-V @rolla_v]

Rolla-V will be at @MACHexhibition this week, Launching our New Press Brake Tooling Catalogue, come and grab one from stand 494 in Hall 6, we will also be showcasing the worlds first CNC Controlled Rolla-V tool
#mach

[Rolla-V @rolla_v]

Acheiving Minimum Flanges/Legs on a #pressbrake usually means bending on a smaller vee, this increases the tonnage needed and can sometimes push it higher than the tool can take. Rolla-V Tooling can bend 1.2mm material and produce an outside flange of only 3.2mm (2mm inside)

[Rolla-V @rolla_v]

In House Test Tools before the full case hardened Customer version Special Bespoke Press Brake Tooling is produced, it will be a 2 hit application, to produce different size overbend radius using mandrel former
#ukmfg #ukmanufacturing #rollav #pressbrake #pressbraketooling

[Rolla-V @rolla_v]

Press Brake Bending by Holes, can be difficult, a relief could be cut in but most times this will spoil the look of the part. If a Rolla-V is used as long as the end of the radius and the start of the hole is the thickness of the material away, it should not distort. #rollav #uk

[Rolla-V @rolla_v]

Rolla-V Rocking Bottom Die, fits to any press brake and is designed to produce small "U" radii in on hit, without the need to use a secondary closing operation. Below video shows a 3mm radius #rollav #pressbrake #pressbraketooling #pressbraketools

[Rolla-V @rolla_v]

Press Brake Tools that actually move, the benefit of the moving inserts means your material does not scratch, it forms tighter radii and doesn't stretch by holes so no distortion #rollav #pressbraketooling #pressbraketools #pressbrake #sheetmetal #ukmfg #ukmanufacturing

[Metalforming Machinery Makers' Association (MMMA) @mmma_]

We’re thrilled to welcome @rolla_v Limited!

Rolla-V manufactures press brake tooling, including the Rolla-V bottom die, which is unique to them, supplied direct into the UK and through dealers worldwide.

Read more 🔗 https://t.co/gu9c8hyjxo

[Rolla-V @rolla_v]

Showcasing the RVHD2.5 with "V Inserts", producing two different length 90° bends at the same time to form a Channel. This will half produce time and costs. Rolla-V tooling were the original innovators and are still years ahead of the others #rollav #fabrication #pressbrake

[Rolla-V @rolla_v]

Rolla-V will be exhibiting at MACH 2026, NEC Birmingham, 20th - 24th April. You will be able to find ourselves in the MMMA Village in Hall 6, Stand 494. Find out whats NEW in the Press Brake Tooling industry
#mach2026 #rollav #pressbrake #pressbraketooling

[Rolla-V @rolla_v]

Not all bends are straight 90° angles, this part needed both ends twisted, The solution - Rolla-V.
If you have a difficult bend that has to be produced on a #pressbrake the first item to think of is a Rolla-V. Why not send in your drawings to [email protected] #rollav #UKMfg

[Rolla-V @rolla_v]

Press Brake Hinge Tooling avaialble from Rolla-V, as long as the inside diameter is 4 x the thickness of the material, this style of tool will work for more details contact [email protected] or 01384 414100
#rollav #hingetool #pressbrake #ukmfg #pressbraketool #hinge

[Rolla-V @rolla_v]

Customers asking you to bend shapes that seem impossible ? We manufacture special bespoke Press Brake Tooling for all machines. Send in your drawings to [email protected] and we will offer a quotation for tooling that will produce it #pressbrake #rollav #bespokemetalworking

[Rolla-V @rolla_v]

Reworking your #sheetmetal jobs can be costly, not only in the initial financial costs but also time wise, it can add a further few days to any dead line. Polishing out bottom die marks or cutting off extra green. A small flange, reduced marking solution is #rollav tooling

[Rolla-V @rolla_v]

The Rolla-V XT Range of Press Brake Tooling
Minimum outside flange 3.2mm/Over bend to 60* Degrees/Made to Fit All Press Brakes/Material thickness 0.3 to 2.3mm/Up to 4.1mm Outside Radius/Up to 70 Tonnes Capacity/Made in the UK 🇬🇧
Big things can come from small packages
#pressbrake

[Rolla-V @rolla_v]

Rolla-V Tooling is known for it's large radius capacity but what if there is no flange to speak of and standard tools damage the ends ? Bump bend using a small Rolla-V Die
#rollav #radius #pressbrake #pressbraketools #fabrication #engineering #ukmfg #ukmanufactured #precision