Tye Santos

[Tye Santos @santos_tye]

@AshTeakle @CaseIHAus Going to have to check the wiring harness,they don’t need help from CNH they need to be proactive and read the schematic to find the wires to the solenoid, local dealer should be able to resolve an isolated issue

[Tye Santos @santos_tye]

@amachin96 Baxters rural centre has the plastics and the membrane for the buttons

[Tye Santos @santos_tye]

@GrahamRalph6461 Yeah it is a bit bullshit on the price of those chains. How many hours did you get out of the chain?

[Tye Santos @santos_tye]

@alansattler74 Good to here! I’d like to see the finished product 👍

[Tye Santos @santos_tye]

@alansattler74 Nice work, who’s doing the fit up if you don’t mind me asking?

[Tye Santos @santos_tye]

@alansattler74 New Cummins X15-E3 conversion, common rail engine with no adblue.
CJDs have stock just about to fit one to a western star#dieselsmobilemechanics

[Tye Santos @santos_tye]

@thyrafarmer There is an updated cam gear, the M6 bolts are superseded with M8 to eliminate this problem

[Tye Santos @santos_tye]

@pete077kuiper @Tedthekelpie Small problems like that can be minimised with a good P.D from your local dealer #baxtersruralcenter

[Tye Santos @santos_tye]

@johngbennett I’d check that your sieves are not missing louvre’s also set the sieves to 6mm and check clearance at the sieves not just on the pro 700

[Tye Santos @santos_tye]

@natopotato111 Put the stationary knifes in more to chop it finer but it will use more horsepower

[Tye Santos @santos_tye]

@AndrewTodd13 What model you running mate?

[Tye Santos @santos_tye]

@GrahamRalph6461 @Case_IH @CaseIHAus @PeteHoRsEMcCann You have the correct information, CNH won’t do stuff all, it will be the dealer out of his own back if he chooses to help in some way

[Tye Santos @santos_tye]

@bullerc95 Are there any more faults displayed if you arrow up?

[Tye Santos @santos_tye]

@FarmerTonyWhite In your gps tab there is a window and it says “ position recall” install this and when you key off and start again it will ask if you have moved the vehicle and follow the prompts this will reduce your waiting time

[Nathan Evans @nathan_evanics]

Spader Hire, Imants 4.5m Spader with Rippers available for dry hire. Please message or call 0417177879 Retweet’s appreciated👍#imants #spader

[Tye Santos @santos_tye]

@AshTeakle @tristan_westoz 22nd till this arvo total of 98mm now!

[Nathan Evans @nathan_evanics]

Imants Spader for sale. 4.5m machine with tyre press wheels and a choice of two types of ripper bars available. Call Nathan on 0417177879

[Tye Santos @santos_tye]

@Nickbai82 @Tedthekelpie I work for new holland and 10% of the wrong oil won’t hurt it,any more and transmission/hydraulic oil will have to be replaced I’d say you need your dealer to check viscous fan function. Are you operating the machine with the ground speed management?