@scottymacon_ will be on-site at Cherry tree tomorrow doing controller modifications. Make sure to stop by his booth! Also make sure you reg before it closes tonight at 10pm! Link below 👇
Eagle's Lair II (55 Entrants)
Thanks to everyone who made it out. I enjoyed running this event despite issues with the stream.
The next one's gonna hit different
1- @Miss_JoyCon
2- @ApolloKage
3- @Ploopy_SSBU
4- @FHCsusan
5- @Caden_SSB@ssb_justin
7- @Zefty_@MrChumples
@SanguineViolet@TheJuSSB basically just follow these instructions, but you're not replacing the spring. just cleaning the individual parts and reassembling (and make sure to use lube afterwards)
https://t.co/eKISjbE06j
@SanguineViolet@TheJuSSB if it's a t3 plastic box, it should be easy enough to completely disassemble with a small screw driver and deep clean all the parts with rubbing alcohol. I lubed mine with speedcube grease afterwards and i've had no issues over the past few months. no soldering required (if t3)
https://t.co/l63a52Sn83 IS THE TOP 8 !!! EASILY THE MOST STACKED TOURNEY OF THE SEASON WITH 23 PEOPLE !!!!! Braacket is updated with the rankings and I really appreciate y'all.