ShortStroke

3D printed guns are fun

[ShortStroke @Short_Stroking]

@InTheCoolZone @k_yamaguccigunz @Dianexis Or maybe people just don't like yzy while having no problem with the article? It's possible to like 3D2A, to even like the article and dislike the guy.

[ShortStroke @Short_Stroking]

@Feral_Fetus @Dianexis I have and will always support this frame🫡

[ShortStroke @Short_Stroking]

@CommonArms @DrDeath1776 There's a FRT for G3s

[ShortStroke @Short_Stroking]

@awr762 @palmettoarmory It already is

[ShortStroke @Short_Stroking]

@SlendyNerd @palmettoarmory KAK sells compatible BCGs https://t.co/pZa0WB4vDi

[ShortStroke @Short_Stroking]

@AGCast4

[ShortStroke @Short_Stroking]

@HoffmanTactical No need to look any further. KF5 with an AR FCG is peak MP5

[ShortStroke @Short_Stroking]

@SpankedTank @ArmedJ0y They increased the freebore to make the 5.56 chamber. You get slightly lower peak pressure because of this and they say cartridges will chamber more reliably. The difference shouldn't matter pressure wise unless you have a cartridge already at or past the edge of safe anyway.

[ShortStroke @Short_Stroking]

@b_556x45 @SpankedTank @ArmedJ0y The cartridges' external dimensions are exactly the same. The chambers are the same too with the exception of 5.56 having a longer freebore. The two cartridges can be interchanged without ill effect. You'd need a round exceeding max pressure in either chamber to cause damage.

[ShortStroke @Short_Stroking]

@DissidentRexy @realMWO @PrintsandtheRev @DrDeath1776 Since he had no proof whether he was more British or Italian he was sent to Hyperborea. May his stain upon our beautiful nation be disremembered swiftly 🇺🇸

[ShortStroke @Short_Stroking]

@ArthurClaudeen Find a local farm to get your meat from. We pay maybe $2 more per pound than what ground beef is going for when buying a half steer, but that includes dozens of steaks, roasts, ground beef, chipped beef, and sliced ribeye for cheesesteaks. The meat is better too.

[ShortStroke @Short_Stroking]

@JoelOBryanPhD @TheAKGuy @azide_enjoyer His videos were strictly chemical synthesis, on which there are many guides available for decades in books and scattered throughout the internet. This is clearly 1A protected and has been ruled as such in the past. He had no how to guides on making ignition devices, etc.

[ShortStroke @Short_Stroking]

@calebcollins345 @Smith_WessonInc Hour is way too easy. You have 5 minutes

[ShortStroke @Short_Stroking]

@DrDeath1776 The grenade setup was the only improvement yet it is not present on current production M70s. That and the original milled ones had a true BHO setup, but it was removed quickly. I'd give my ZPAP a solid 5/10.

[ShortStroke @Short_Stroking]

@palmettoarmory Price?

[ShortStroke @Short_Stroking]

@Shadzey1 This is probably aimed directly at SOLGW's armad barrel. They themselves have stated that the production of their armad barrel is directly tied to ammunition development. Maybe SIG will try getting a version of their Spear LT or 516 G3 adopted for this requirement, but idk.

[ShortStroke @Short_Stroking]

@Thomas977673521 @BrandonFDW @FnahtanoJ 5.56 proof rounds are like 78k psi. The gun would handle it just fine

[ShortStroke @Short_Stroking]

@Rando51865268 Trve. They're not cheap to make like ARs so that's part of it, but that price still hurts

[ShortStroke @Short_Stroking]

@Sawisthe_Law @palmettoarmory This is being made by DSA under variance. DSA sells plenty of stripped receivers. PSA isn't making FALs so don't get your hopes up on prices coming down.