sonik_br

Life is short. Play more!

[sonik_br @sonik_br]

@iequalshane The original game had FFB back then!
Uses i-force protocol over serial port.

[sonik_br @sonik_br]

Pretty cool to play a DOS era game with real force feedback effects.

Need for Speed: Special Edition

And yes, the game's replay also sends FFB commands XD

[sonik_br @sonik_br]

@ArcadeRacing_0 Amazing! Any info on the emulator being used? I'm not aware of any with 16:9 support.
And it would be even more amazing with wheel FFB support XD

[sonik_br @sonik_br]

@_SixelAlexiS_ This is the custom game rom running on mame.
And a custom firmware for rp2040 based PSX to USB adapter.
My firmware is not open source but I can share the binary id you're willing to build the adapter

[sonik_br @sonik_br]

Rotary Bobble ROM hack is so cool!

[sonik_br @sonik_br]

@YTNaiAdventure Não é novidade... Controle Panther, da Mad Catz, é dual analog e foi lançado na época para o console. Totalmente compatível com Quake 3.
Tem uns 10 anos que já existem adaptadores que suportam esse recurso ao utilizar por exemplo um dualshock.

[sonik_br @sonik_br]

@afaelr @ComuDoMega Dual Analog japonês é "single shock". O americano é "zero shock" kkk.

[sonik_br @sonik_br]

@amarinabarbieri Sempre uso cartão virtual, gerado na hora, com validade de apenas uma compra.
Dito isso, varias vezes que usei um cartão único desses no ML, houve tentativas posteriores de uso do mesmo numero!
Ou seja... tá vazando de lá. Só acontece quando uso no ML.

[sonik_br @sonik_br]

@W00fer I don't have any hardware anymore. I only know if something works or not when someone report back to me.

[sonik_br @sonik_br]

Have a Sega Astrocity mini or a Taito Egret mini?
Please test the specific output modes of PicoZord and let me know if it works. I don't have access to those mini arcades for testing.
https://t.co/hUQE9jIOcq

[sonik_br @sonik_br]

I've added usb output mode auto detection to PicoZord.
It will detect if being connected to PS4/5, Switch1, ogXbox, and will automatically change to the correct output mode.
It's still being tested. Let me know if you find any problem.
https://t.co/hUQE9jIOcq

[sonik_br @sonik_br]

@DesgracadoEmo Isso ai.
E os pinos do GPIO, saem do pico e ficam do lado L no shifter.
No lado H, vão pro conector do saturno.

[sonik_br @sonik_br]

More FFB racing games should have supported the jogcon. NFS:HP2 on PS2.

[sonik_br @sonik_br]

@DesgracadoEmo Quase...
VCC saturno > HV. Correto.

Esse mesmo VCC, tem que ir no pico VBUS, para alimentar o pico e o controle usb com 5v.

E o LV vai no pico 3ve out.

[Randy Linden @RandalLinden]

Hey friends,

@TheRealZophar put together a video interview with me and needs some footage showing bleem! or bleemcast! running ... and I don't currently have a way to do that for him.

Is there anyone out there who can help with about 30 seconds that shows two or three games running under emulation?

Thanks!

[sonik_br @sonik_br]

@DesgracadoEmo O level shifter precisa do GND, 5v e 3.3v tambem.
Ele tem dois lados, um LOW e um HIGH.
Em low tem que ligar os pinos do pico e o 3.3v do pico.
Em high vai os pinos do saturno e 5v.
GND no shifter geralmente é interligado entre os dois lado H/L (pode testar com multimetro)

[sonik_br @sonik_br]

@HAMSTER_Corp Thanks for doing this amazing release! But please add force feedback wheel support.🙏

[sonik_br @sonik_br]

@HAMSTER_Corp Supports Racing Wheel with Force Feedback?

[sonik_br @sonik_br]

@chaosweilder Currently not possible to remap digital <> analog.
But it does output as a switch pro controller. Might be possible to remap it on nintendo switch?

[sonik_br @sonik_br]

RetroZord has finally evolved!
Some of it's USB2USB features:
Up to 4 input controllers > Xinput for PC.
PS4 console.
Analog (pressure sensitive) buttons/dpad.
Supports many usb devices, with correct button mapping.
And many more features.
Give it a try!
https://t.co/hUQE9jIOcq

[sonik_br @sonik_br]

@RobertDaleSmith I believe nocash documented it here
https://t.co/j98GQwE5lU

Handy... Unless you really want to do the fun part (to reverse engineer) XD

[sonik_br @sonik_br]

Just added a build for the Adafruit Feather RP2040 USB Host.
Can be used as USB2USB adapter!
It's untested by me. If someone test, please report :)

[sonik_br @sonik_br]

@W00fer The same ones that work on GP2040 should also work here. ;-)