SST Automation (SSTCOMM)

#industrialautomation company based in California. Experts in HART, ENet/IP, BACnet, Modbus, MQTT/IoT, PROFINet...

Inquiries please contact [email protected]

[SST Automation (SSTCOMM) @sstcomm]

Modernizing a factory floor often leads to a compatibility gap between high speed EtherCAT networks and essential serial field devices. When you are running a system with OMRON or Beckhoff PLCs, it is frustrating to find that your existing sensors or drives cannot communicate with the newer architecture without a significant workaround.

The GT200-EC-RS is designed to bridge this gap by bringing Modbus RTU or ASCII devices directly into the EtherCAT environment. As illustrated in the application diagram, it allows for a unified connection between your controllers and a wide range of RS-485 hardware such as weighing instruments, VFDs, and laser rangefinders. With a high data capacity of 512 bytes for both Input and Output, it can handle data intensive applications without becoming a bottleneck in your data stream.

Instead of writing complex drivers or replacing perfectly good hardware, you can use our configuration software to map registers quickly. This software includes diagnostic tools that help you verify data flow during the setup phase, which significantly reduces the time spent on commissioning. The gateway is built for industrial reliability, ensuring that your communication remains stable even in demanding factory settings where uptime is critical.

Using the GT200-EC-RS allows you to maintain your current investment in field assets while taking full advantage of the speed and precision that EtherCAT offers. It is a straightforward way to achieve better data visibility and a more connected manufacturing process.

Learn more at our website: https://t.co/I0Hl6NBLrG
Technical Support: [email protected] Sales Inquiry: [email protected]

#IndustrialAutomation #EtherCAT #Modbus #SSTAutomation #Manufacturing #Engineering #PLC #IIoT #SmartFactory #RS485

[SST Automation (SSTCOMM) @sstcomm]

Many industrial environments still rely on HART-enabled field devices for critical process data, but integrating these devices into modern PROFINET-based control systems is often complex and inefficient. Engineers frequently encounter challenges with multi-device communication, limited diagnostics, and lengthy commissioning times, especially when scaling systems or maintaining legacy infrastructure.

The GT200-4HT-PN gateway provides a streamlined way to connect HART devices directly to PROFINET networks. Designed with flexibility in mind, it supports up to four HART channels and can operate as either a primary or secondary master, enabling smooth integration without disrupting existing setups.

At its core, the gateway enables four-channel HART polling communication, supporting both point-to-point and multi-drop modes while remaining compatible with HART 7 and earlier protocols. On the PROFINET side, it operates as a slave device and supports RT and IRT communication for real-time data exchange. With configurable input and output data sizes of up to 1440 bytes, engineers can tailor data handling to their specific PLC environment. The included SST-HPN-CFG configuration software enhances usability by providing clear data visualization, command diagnostics, and efficient debugging capabilities, significantly reducing setup time.

The result is faster system commissioning, improved access to device-level diagnostics, and a significant reduction in integration complexity. By enabling reliable, high-speed communication between legacy HART devices and modern PROFINET systems, the GT200-4HT-PN helps organizations extend the life of existing assets while advancing toward smarter, more connected industrial operations.

Learn more: https://t.co/b0KahLdoFV

For Technical Support: [email protected]
For Sales Inquiry: [email protected]

#IndustrialAutomation #PROFINET #HART #IIoT #SmartManufacturing

[SST Automation (SSTCOMM) @sstcomm]

Bridge Modbus RTU and BACnet/IP networks with the GT200-BM-2RS. This robust gateway supports hundreds of BACnet objects and features dual RS485 ports for maximum scalability. Contact our team today for integration support.

#BACnet #Modbus #Automation #SCADA #SmartBuildings

[SST Automation (SSTCOMM) @sstcomm]

How do we move from 'Existing+' to 'Orchestrator'? 🚀
MIT Sloan's new framework highlights the shift towards AI-mediated collaboration. At SST Automation, our MQTT Gateways provide the real-time, bi-directional data flow that makes this transition possible.
Whether you are integrating with #Kepware environments or building next-gen #AIoT solutions, the key is turning raw device data into actionable AI insights. 🌐🤖
#MITSloan #IndustrialAutomation #MQTT #DigitalTransformation

[MIT Sloan School of Management @MITSloan]

With the rapid adoption of AI technologies, @MIT_CISR created a business model framework for the AI era that shows businesses evolving to become increasingly outcome oriented and enabled by autonomous AI.

Learn more: https://t.co/8GmokaHFIA

[Industrial Ethernet magazine & blog @IEBook]

Beyond the Cable Run: Industrial PoE Solutions Built for the Remote Edge https://t.co/b7dnlEaPsA Power over Ethernet (PoE) reliably delivers power to remote sites with a single Ethernet cable delivering both power and data over long distances acts as the enabling technology. #PoE #poweroverethernet #antaira

[SST Automation (SSTCOMM) @sstcomm]

Need to connect a PROFINET PLC to multiple Modbus TCP devices?

The GT200-PN-MT makes integration simple with reliable data exchange and stable communication across your automation network. One gateway, seamless connectivity.

#PROFINET #ModbusTCP #IndustrialAutomation

[SST Automation (SSTCOMM) @sstcomm]

@Modbus_RTU Hi, we are an industrial gateway manufacturer focused on Modbus RTU and Modbus to MQTT/IoT integration. We are currently looking for partners or distributors in Japan. Would you be open to discussing potential cooperation?

[SST Automation (SSTCOMM) @sstcomm]

@JasonCh44862914 Yes, our products fully support GOOSE messaging according to the IEC 61850 standard. Let us know if you need more technical details!

[SST Automation (SSTCOMM) @sstcomm]

Need to connect Modbus devices to an IEC 61850 system? The GT850-ES makes it simple.

Enable fast and reliable data exchange between legacy equipment and modern power automation systems, built for performance in critical infrastructure.

#IEC61850 #Modbus #IndustrialAutomation

[SST Automation (SSTCOMM) @sstcomm]

Connect Modbus TCP devices to EtherNet/IP the easy way.

The GT200-MT-EI gateway simplifies integration with seamless data exchange and no PLC changes needed. Deploy fast and keep your system running reliably.

#IndustrialAutomation #EtherNetIP #ModbusTCP

[SST Automation (SSTCOMM) @sstcomm]

Maximize your uptime with the GT100-MQ-IE Gateway!
🔹Networks: eMTC/LTE-M & NB-IoT 🔹Protocol: MQTT🔹Benefit: Real-time monitoring & predictive maintenance
The future of #IIoT is data-driven.
Details here: https://t.co/Nv3VU3dVAu
#MQTT #LTE #NB_IoT #LPWAN

[SST Automation (SSTCOMM) @sstcomm]

How do you move Modbus data from PLCs, drives, and meters to the cloud? GT100-MQ-RS connects field devices to MQTT servers over Ethernet, enabling remote monitoring, mobile apps, and data analytics. #IIoT #MQTT #Modbus #IndustrialAutomation

[SST Automation (SSTCOMM) @sstcomm]

The GT200-EI-CO CANopen gateway enabled data centers to integrate UPS battery systems into their EtherNet/IP monitoring without hardware changes. Bridging CANopen to EtherNet/IP improved visibility and power continuity.

Case study: https://t.co/h6v6Uf8N2o

#Automation #CANopen

[SST Automation (SSTCOMM) @sstcomm]

The GT300-EI-2RS485 makes it easy to bring Modbus RS-485 equipment onto EtherNet/IP networks. With DLR redundancy and dual Ethernet, it supports reliable performance in demanding automation environments.

#Automation #EtherNetIP #Modbus

[SST Automation (SSTCOMM) @sstcomm]

Still using Modbus RS485 devices in substations?
The GT850-ES gateway converts Modbus data into IEC 61850 (MMS), allowing seamless integration with SAS, SCADA, and digital substations.
Visit https://t.co/AA7MT1yXeu for more details.
#SmartGrid #PowerAutomation #IEC61850 #Modbus

[SST Automation (SSTCOMM) @sstcomm]

Happy New Year! In 2026, SST Automation is excited to advance industrial connectivity with smart and reliable solutions. Our seamless industrial protocol conversion gateways drive efficiency across networks. Here’s to a year of progress in industrial automation! #Automation

[SST Automation (SSTCOMM) @sstcomm]

Are you looking for a way to connect EtherCAT to EtherNet/IP? Look no further.
SSTCOMM GT300-EC-EN gateway can seamlessly connect multiple EtherCAT Servo devices to EtherNet/IP network.
Visit https://t.co/NJt3nyG8Ud to get more details.
#EtherCAT, #EtherNetIP

[SST Automation (SSTCOMM) @sstcomm]

Looking to connect your legacy Siemens PLC to Node-RED? Link your system with the SSTCOMM GT100-IE-MPI easily! Our team of engineers can offer expert guidance to get you connected.

Learn more at https://t.co/loSrm08HjN or call 909-977-2988

#PLC #NodeRed #IndustrialConnectivity

[Inductive Automation @InductiveAuto]

The OPC UA Module adds a cross-platform OPC UA server and client to Ignition, making it easy to exchange data between devices and forming the core of most Ignition applications.

Watch now: https://t.co/TnwUmhnat0

#OPCUA #Ignition #Automation #Server #PLC

[SST Automation (SSTCOMM) @sstcomm]

SSTCOMM GT200-PN-EC gateway can help you easily connect EtherCAT Servo devices to PROFINET network. For example, to integrate servos, frequency converters and other devices to Siemens PLC system.
Visit https://t.co/DLZ7uo74o2 to get more details.
#EtherCAT, #PROFINET