Paul

This Designed That is a blog dedicated to showcasing art and design from around the world. No stone is left unturned is our search for good design.

[Paul @thisdesignedtht]

Here are my favourite tool purchases from 2023! What were yours?
Full list here - https://t.co/alybRsgHTt

[Paul @thisdesignedtht]

First part of my shed/workshop build is complete. The foundations are in!
Full video on Youtube - https://t.co/CGep6OCGTS

[Paul @thisdesignedtht]

worlds

[Paul @thisdesignedtht]

Having far too much fun with #StableDiffusion animations!

[Paul @thisdesignedtht]

Today I make a cheap MFT table from an old office desk to fit into my tiny workshop. Full build and 3d printed files available here https://t.co/eUPSRvb0Z8

[Paul @thisdesignedtht]

Reinforcing a 3D Print with resin and fiberglass. I have a ton of old polyurethane left over so when I want a functional 3d printed part I just print the shell and fill it with resin, its super tough and MUCH quicker to print just the 2 perimeter walls
#3dprinted #functionalprint

[Paul @thisdesignedtht]

Comparison of my 4" DIY roller vs Speedball 1" roller - Makes rolling out MUCH easier 

#printmaking #printmaker #printmakersofinstagram #printmakers #printmakingstudio #reliefprintmaking #printmakersprocess #experimentalprintmaking #nontoxicprintmaking #printmakerslife

[Paul @thisdesignedtht]

Some more #lasercut #woodblockprint experiments
#ortur #printmakingprocess #experimentalprintmaking

[Paul @thisdesignedtht]

Today I wanted to do a quick experiment with my laser engraver from @OrturOfficial to see if I could engrave some halftones for #reliefprinting. It works! I think I can go smaller dpi for finer details. 

Is anyone else using a laser engraver in their #printmaking process?

[Paul @thisdesignedtht]

Having some fun experiments with my new @OrturOfficial Laser Master 3. Wanted to see if you could remove etching ground with the laser for copper sulphate etch. It worked! Need to find some larger metal plates to do a bigger etch, first I MUST build an enclosure for this thing

[Paul @thisdesignedtht]

Finally making use of the 2 Ton arbor press I picked up off eBay. Bit overkill for this Voron 0.1 mod maybe.... #3dprintinglife #3dprinted #3dprinter

[Paul @thisdesignedtht]

Custom build for the Klipperscreen mod on my #Voron3d 0.1! A much-needed upgrade for any voron 0 owners.
Fusion360 tutorial if you are interested to see how I designed this - https://t.co/2WekjKYOTj

[Paul @thisdesignedtht]

Custom build for the Klipperscreen mod on my Voron 0.1! A much-needed upgrade for any voron 0 owners.
Fusion360 tutorial if you are interested to see how I designed this - https://t.co/2WekjKYOTj

[Paul @thisdesignedtht]

I just bought Th33xitus a Coffee on Ko-fi! ❤️ https://t.co/HR6YrdnUSs

[Paul @thisdesignedtht]

I just bought Klipperscreen a Coffee on Ko-fi! ❤️ https://t.co/oClvVsIwHT

[Paul @thisdesignedtht]

Making an Ash shelf for Flair Espresso parts! #espresso #flairespresso #coffee

[Paul @thisdesignedtht]

Electro etching with salt. A chemical-free process that creates a lovely texture in aluminum for intaglio printing. It can also be used to make hot foil stamping plates too. Check out the tutorials on my YT page.

[Paul @thisdesignedtht]

Making a paper embossing plate with epoxy resin. Full tutorial - https://t.co/gj1swF8LR0 #papercraft #papercrafts #printmaking #printmaker #printmakersofinstagram #abstractprintmaking

[Paul @thisdesignedtht]

Quick Tip: Made some DIY drop nuts for V0.1 15x15 extrusion. Just file down opposite corners of a m3 nut. Does the job for fixing a nevermore micro into the frame. #voron3d #vorondesign #3dprinting #3dprinter #3dprintinglife

[Paul @thisdesignedtht]

In the process of restoring an old v5 hotend from my first 3d printer. Anycubic i3 Mega. Common issue with the older v5 hotend is clogging and oozing from the heater block. Going to try and reset it but I think I might be upgrading to a v6 all metal hotend for the i3. #3dprinting