Thomas Jensen | @[email protected]

I enjoy single malt scotch, cigars, my homelab, electronics, linux and spending time with my wife and three boys.

[Thomas Jensen | @[email protected] @thomasjsn]

I don't post here much, you can find me on:
- Bluesky: https://t.co/21iMigK2E6
- Mastodon: @[email protected]

There is also a feed available for the blog: https://t.co/9Aluq0I5nF

[Thomas Jensen | @[email protected] @thomasjsn]

The resurrection of my file server is complete 🍻 https://t.co/kUGgNsCs6t

#homelab #zfs #fileserver

[Thomas Jensen | @[email protected] @thomasjsn]

Blog post about the RRCP (Realtek Remote Control Protocol) broadcasted frames that caused 1 drop/s. https://t.co/8btQJTM73z

[Thomas Jensen | @[email protected] @thomasjsn]

So, @netdatahq looks nice. I've been without a monitoring solution for a while now — didn't want to spend time setting one up. Currently doing some tests with a parent node streaming to their cloud. Excited to see that their "Anomaly advisor" will find. #homelab

[Thomas Jensen | @[email protected] @thomasjsn]

The mystery seems to be solved — actually it was two things: the lack of VLAN egress filtering, as suspected. But the main culprit was RRCP broadcasts from my TL-SG108PE switch, or "Loop Prevention" as they call it. Disabled that and the 1 drops/s went away 🥳

[Thomas Jensen | @[email protected] @thomasjsn]

Only took about a year to get the blog post published. Better late than never. Here is my @GoHugoIO #BunnyStream implementation 🤠 https://t.co/AdCQhzy1R6

[Thomas Jensen | @[email protected] @thomasjsn]

I discovered last week that some of the videos on my blog didn't work, froze on my phone, and random CORS errors 🤷‍♂️ Down the rabbit-hole I went — looking for a video service, YouTube and Vimeo is out. I mainly looked at @MuxHQ and @BunnyCDN Stream.

[Thomas Jensen | @[email protected] @thomasjsn]

I have tried @BunnyCDN Streams before, when it was in preview. It seems more polished now 🙂 I wrote about my previous video solution a few years ago. https://t.co/jZsAwmB16K

[Thomas Jensen | @[email protected] @thomasjsn]

The #fiber between the house and garage is finally operational 🥳 #homelab #networking https://t.co/01jL9O5pfp

[Thomas Jensen | @[email protected] @thomasjsn]

60 meter 6-strand single mode #fiber and SFP modules from @Ubiquiti. Going to pull the fiber in a buried conduit to the garage. @mikrotik_com CRS317-1G-16S+ in the #homelab and D-Link DGS-1210-10P in the garage. #networking

[Thomas Jensen | @[email protected] @thomasjsn]

LC keystone jacks and OS2 patch cord have been ordered 😎

[Thomas Jensen | @[email protected] @thomasjsn]

Using a #Shelly Plus Plug S to monitor the #homelab power — I got much better results using an #MQTT sensor than the integration in #HomeAssistant 🔌 https://t.co/Llaw5BvUCV

[Thomas Jensen | @[email protected] @thomasjsn]

@dreamsindrums @GoHugoIO Thank you 🙂 I've (somehow) managed to get the writing productivity back up.

[Thomas Jensen | @[email protected] @thomasjsn]

I've added navigation buttons to my @GoHugoIO series taxonomy, making it much easier to navigate ⏮️⏭️ https://t.co/FbXUWTIOo3

[Thomas Jensen | @[email protected] @thomasjsn]

Sometimes I do non-computer related projects — like turning an old oak tabletop, from my friend's barn, into a pub table. https://t.co/vVXgVgQLfO

[Thomas Jensen | @[email protected] @thomasjsn]

My #homelab page is now up to the with all the recent changes 🖥️ https://t.co/Lu8liCVCoe

[Thomas Jensen | @[email protected] @thomasjsn]

The computer page for the new #homelab #server is published 🤓 https://t.co/1hnJTCD297

[Thomas Jensen | @[email protected] @thomasjsn]

I solved my #wireguard problem — slow egress through my #mikrotik #chr. I was "working" with the @KagiHQ Assistant while troubleshooting. My first time using an AI assistant, I am fairly impressed 🙂 https://t.co/xW945gcMiT

[Thomas Jensen | @[email protected] @thomasjsn]

Underground conduits from the house to garage, and garage and shed. Power and #fiber 🤘 https://t.co/0LZhT3p8PU

[Thomas Jensen | @[email protected] @thomasjsn]

20 years of #homelab ♥️ https://t.co/3Uj8TPnOLu

[Thomas Jensen | @[email protected] @thomasjsn]

Troubleshooting low throughput on @mikrotik_com CHR in my #homelab — I made an interesting discovery about interface queues, that had a big impact. https://t.co/Wit8faVbru

[Thomas Jensen | @[email protected] @thomasjsn]

I have a few projects ongoing in the #homelab this winter. https://t.co/7CXvtTAkYi

[Thomas Jensen | @[email protected] @thomasjsn]

@Raspberry_Pi @home_assistant @dakboard Only took close to two years to get the blog pots published 🤷‍♂️ https://t.co/xtzgW6UEzq

[Thomas Jensen | @[email protected] @thomasjsn]

I'm using an old @Raspberry_Pi 2 and a DS18B20 probe to accurately measure outdoor temperature. Value is sent on #mqtt to @home_assistant, and displayed on our @dakboard digital calendar 👍

[Thomas Jensen | @[email protected] @thomasjsn]

Using @home_assistant; I'm setting the clock on our #Komfovent #ventilation system once a week — to prevent it from drifting. https://t.co/SjLKLDetlU

[Thomas Jensen | @[email protected] @thomasjsn]

Upgrading the #Proxmox server hosting my #mikrotik #CHR router. I first downloaded the updates, before taking the VM down. https://t.co/SqhMVJsi6f

[Thomas Jensen | @[email protected] @thomasjsn]

I’ve been using my HP ZBook 15 G5 #laptop a lot lately, but it annoyed me that I couldn’t tap the touchpad in i3. But fixing/enabling it was a breeze 🙂 https://t.co/mVO9W9R7F4