Vitz

[Vitz @vitz_p]

@Dayanch96 @TomerGamerTV I have two iOS devices and would like to use the app on both. Does this mean I’ll need two different Patreon subs?

[Vitz @vitz_p]

@Gusse__ Gorgeous!

[Vitz @vitz_p]

@zombie_round I'm getting lots of stuttering while running it on 6.50 etahen 2.2 and external SSD. I tried with kstuff toggle but the issue still persists. Any suggestion pls?

[Vitz @vitz_p]

@Khayr_Al_Din @sthetixofficial Always updated via OFW and N servers with Pico (official FW, no Ali clones) and never had issues.

[Vitz @vitz_p]

@JKSTransRights @TakiUdon_ I’m interested as well of buying this kit with Touch panel. Please let us know if it will be back, thanks

[Vitz @vitz_p]

@Root_Sudo2 @notnotzecoxao What FW are you on?

[Vitz @vitz_p]

@master_s9 Same one I got on my PS4 CUH-2216B SAF-006 (1-983-670-11) board with no PPPwn success during Stage1.
That IC GST5009S seems to have only inductors inside, not sure if the Ethernet controller is somewhere else.

[Vitz @vitz_p]

@notnotzecoxao If I cannot load Goldhen (stuck at Stage 1), would the debug output be still useful? I understood that it’s encrypted. If it’s still ok, I can order a TTL converter and solder in a couple of days

[Vitz @vitz_p]

@master_s9 PS4 Slim
FW 11.00
Model: CUH-2216B
Board: SAF-006 1-983-670-11
PPPwn does not work: never passes Stage 1

[Vitz @vitz_p]

@CelesteBlue123 Thanks for the update! Do you know an eventual IC that one could try to swap it with?

[Vitz @vitz_p]

@notnotzecoxao If that ethernet IC is the problem, I have a hot air station laying around 😉

[Vitz @vitz_p]

@notnotzecoxao CUH-2216B
SAF-006
1-983-670-11

[Vitz @vitz_p]

@CelesteBlue123 @notnotzecoxao CUH-2216B SAF-006
1-983-670-11
Can we swap the network IC with something else? 😅 (if it’s the culprit)

[Vitz @vitz_p]

@CelesteBlue123 @notnotzecoxao HDD has some stuff inside and I haven’t restored it yet (read some people who done it and it didn’t help). Tomorrow I’ll give you details about the space and mobo#.
Haven’t tried bootpppwn, can I run it on Win10 and should I start it before powering PS4?

[Vitz @vitz_p]

@rincol1015 Thank you for all your work. On my PS4 slim 11.00 nothing yet worked, I'm trying your C++ version, but I get upon execution an error for packet detection: "Setting direction is not supported on this device'". What did I miss?

[Vitz @vitz_p]

@ps4fanboy @rincol1015 Same here with Slim on 11.00, tried 2 PCs (Win10 and Ubuntu) + Rpi, different RJ45: 90% fails to detect corrupted file and 10% console shutdown on Stage1. No success, it's getting really frustrating...

[Vitz @vitz_p]

@master_s9 Yes, it’s in the root of the USB key. Tried with both FAT32 and exFAT. The PPPwn never gets to step 2, it fails during step 1: can’t find corrupted package or console shuts down

[Vitz @vitz_p]

@master_s9 Thanks for all the work and adding Ethernet option as well!
I tried over 200 times: 2 different PCs, Win and Ubuntu, RPi4 and 2 different cables, no success. I have a slim on 11.00 and I usually get “scanning for corruption package failed” or it crashes before that. Any idea?

[Vitz @vitz_p]

@master_s9 Can I change Ethernet Port somehow? Thanks