This print appears to be happening in midair - it's a method of #3Dprinting that combines direct ink writing with up-conversion particles-assisted photopolymerization. With this method of printing ceramics, the need for support structures is eliminated
Credit: ASTM International
@MrSTEmurray Would change out replace hotend extruder had similar problems and this easily fixed it. And you can get a few replacement hotend extruder cheap on amazon.
@da4throux Thank you for reaching out at this time we are I a transitionary period we can will let you know once we begin to carry more Z-Zcatch tools!
Three #HalloweenHackfest projects will score a $150 shopping spree to @digikey!
Winning projects that include an @adafruit board will win a bonus of having their prize doubled for a total of $300!
https://t.co/FWb09DUGaX
1.5 Nm Torque limiter attachment for your ZCatch tool available today! We are offering this as a 3D Printable build or you can get this fully assembled!
Hi Everyone,
Please be advised in your ZCatch Tool guide pamphlets we list a temperature of 205 deg Celsius to set your printer temp. This temp may be too low depending on your hot-end setup. We suggest checking with your manufacturer for accurate nozzle removal temperatures.