Most shops assume they're running efficiently. Michael Langston President & COO of OMW Corporation, can prove it.
Since going live with Datanomix across their entire shop, OMW has seen 12% improvement in utilization across 43 machines in less than a year. Five locations. Four shifts. No new equipment.
That's not a small win. That's new capacity without buying a single machine.
Watch the full conversation from our latest episode of the First Down series: https://t.co/nQ49rC5fpC
#Datanomix #PrecisionManufacturing #ManufacturingData
If you are heading to Automate 2026 in Chicago, you will want to read this Q&A with our CEO & Founder, Greg McHale, before you walk the floor → https://t.co/MPJ3LRB27Z
In the interview with Manufacturing Tomorrow, Greg shares why production monitoring is what makes manufacturing automation investments actually pay off, and what every shop owner should ask themselves before signing a quote for new equipment. Plus, he shares how our customers are using our AI tools to simply answer the question: Are we getting better?
Swing by our Booth #12059
(https://t.co/y8fEWtRulP) at #Automate26 to learn more.
#Automate2026 #Manufacturing #Datanomix #CNCManufacturing
Someone on your team is already acting as the digital thread. Chasing data between systems, reconciling numbers, connecting dots that should never have been disconnected in the first place.
That's not a strategy. That's a person burning hours on a problem that technology should be solving.
AI can fix it. But not if your data is still living in silos. The breadcrumbs have to be there first. The right programs. The right connections. The right technology partners are pulling it together. When that foundation is in place, you stop reacting and start getting told what's wrong, what to do, and how to get better.
You don't have to be fully connected to start. You just have to start.
Greg McHale and Hiren Kumbhojkar of @HexagonMI lay out exactly what that looks like in the first session of the Manufacturing Digital Workflows series.
See where your shop should start and what's possible when the thread comes together https://t.co/S37nOfLB6X
#PrecisionManufacturing #AIManufacturing #Datanomix #Hexagon #ManufacturingDigitalWorkflows #DigitalThread #CNCMachining #ShopFloor
You can't improve what you can't see.
Bob McGregor at @neo_industries knows exactly what happened inside every machine after every single job. Not with guessing. Not on a gut feel.
As Bob put it, "Everything that goes on in that machine gets captured, and we analyze runs from run to run, batch to batch, and try to always improve our process."
That's how you scale a small business.
Watch the full story with @TonyGunnGlobal here: https://t.co/rdBRovCZwn
#Datanomix #MachineMonitoring #SmallShop #CNCMachining #Manufacturing #ProductionMonitoring
Datanomix Customer Success Manager Jesse Bunnell made the trip out to OMW Corporation in California for an on-site training day with Owner and Founder Joe Osborn and the team.
We don’t just provide software. We show up, dig into your operations, and work alongside you to solve real production challenges on the floor.
Shoutout to Joe and the whole OMW Corporation crew for the warm welcome! We love working with you!
#Manufacturing #CustomerSuccess #Datanomix #PrecisionManufacturing #MachineMonitoring
Before you sign a machine quote, read this:
Every precision manufacturer hits a point where the work is piling up, and the instinct is to buy another machine. It feels like the obvious answer. But Jack Russell, Owner of Rolar Products, asked a different question first: what are my machines actually doing right now?
That question, backed by real data, changes everything. It tells you where time is leaking, where capacity is sitting idle, and whether you actually need to spend the money at all.
Check out the First Down #Webinar and learn how Jack found hidden capacity already on the floor: https://t.co/h0JrxwCDEQ
#MachineMonitoring #ShopFloor #PrecisionManufacturing #Datanomix #FirstDown #CNCMachining #ManufacturingLeadership
46% more utilization. Same machines. Same team. Just better visibility into what was actually happening on the floor.
Kody Guidry, GM of Coastal Machine & Supply, joined Gabe Maentz to share what changed when his team finally got a clear picture of production data and how that visibility changed the way the whole team operates.
The full conversation is now available on-demand here → https://t.co/7QsPrSN7hZ
#MachineMonitoring #ConnectedManufacturing #Downtime #ManufacturingLeadership #Datanomix
32 minutes to 10.
Machine utilization ⬆ 35%. Downtime ⬇19%. 5x ROI on the investment.
Same titanium part. Same machine. Same operator. Different approach. Better results.
Bob McGregor at @neo_industries stopped guessing about where his cycle time was going. Datanomix showed him tool by tool, which paths were eating the clock. He made the calls. Different insert. Tighter feed. The math got clear, fast.
Most shops still think monitoring is for big operations. It isn't. The principle scales from a handful of machines to hundreds. What changes is what you do with what you see.
Read the full story on Manufacturing Tomorrow:
https://t.co/56bzjdbf5b
#CNC #MachineShop #Manufacturing #ProductionMonitoring
We could not be more grateful for partners like the Hill Manufacturing and Fabrication team. It’s always a pleasure to spend time with Mike Payne and his crew.
While on the road through the heartland of America, the #Datanomix executive team stopped in to train up a new monitoring champion at Hill, Miguel Sanchez. This is what Kick-Ass #Coaching looks like. Not a one-time onboarding. A real effort to invest in your people and your production.
Want to learn more about our coaching?
https://t.co/jXt6l2aeox
#Manufacturing #KickAssCoaching #CNCManufacturing #ProductionMonitoring
Big day for #Datanomix in the heartland of America!
Greg McHale, Annie Michaud, and Eric Schnadig were on-site at MAPP Technologies in Joplin, MO, helping install #productionmonitoring onto more machines. This is what Kick-Ass #Coaching looks like! We do not just talk about it. We deliver it.
Learn more about how we onboard, coach, and expand with our customers here: https://t.co/AGk80tjMbS
#Manufacturing #CNCManufacturing #MachineMonitoring #Joplin
In 2022, the industry said that production monitoring without operator input was “impossible”, “rake”, and “it would never work”.
But Datanomix was already doing it.
No Operator InputTM was just chapter one back when we were established in 2018, and we haven't stopped pushing since.
Greg McHale tells what's next for #Datanomix on The Machinists Club Podcast with @TonyGunnGlobal: https://t.co/slWXVKuTij
#PrecisionManufacturing #TheMachinistsClub #ManufacturingData #ProductionMonitoring
Mike Payne bought Hill Manufacturing in 2018 and has since added five shops across four locations over the past eight years!
That doesn't happen by accident. And it doesn't happen with disconnected systems.
"The ability for my team and me to manage four locations from wherever we are would not happen without this digital thread."
Most manufacturers talk about it. Mike built it.
Mike sat down with Eric Schnadig on our webinar series with @HexagonMI to tell the whole story. Watch it here: https://t.co/4CGDCCmhjJ
#ManufacturingDigitalWorkflows #DigitalThread #PrecisionManufacturing #MachineMonitoring
“I would’ve guessed we were more like 75-80%. Last week we were at 45%.”
— Josh Cook, President of Right Angle Steel
In our latest #webinar with Hexagon Manufacturing Intelligence, Josh shared what happens when gut feel is no longer enough and what it actually looks like to replace it with real-time data and digital workflows.
It’s an honest look at the messy middle of building a real digital thread.
Watch the recording here: https://t.co/7kHJt67nEJ
#Manufacturing #DigitalTransformation #ManufacturingTechnology #DigitalThread #ProductionMonitoring
Kody Guidry, GM of Coastal Machine & Supply, is joining Gabe Maentz on May 21 at 2pm ET to share what changed when his team got a clear picture of what was happening on the production floor and how that visibility changed the way the whole team operates.
They'll cover how downtime visibility changes how teams respond to problems, what the data revealed about where production time was actually going, and what becomes possible when your ERP and machine monitoring work together.
Register here: https://t.co/lEpNjgxe4S
#MachineMonitoring #ConnectedManufacturing #Downtime #ManufacturingLeadership #Datanomix
Your best customer just asked you point-blank: how can you compete?
How would you respond? Michael Langston President & COO of OMW Corporation, knew exactly what to do. He spun his laptop around and showed a room full of supply chain executives exactly what was happening on his shop floor in real time. Utilization and machine status. All Live. Thousands of miles away.
Six weeks later, $2.5 million in new work.
Get the story straight from the machine, and wow your customers too.
Watch the full conversation from our latest episode of the First Down series: https://t.co/ugiDs53VTP
#Datanomix #PrecisionManufacturing #ManufacturingData
Your machines are already telling you something. The question is whether your team can hear it. See how production monitoring makes that possible: https://t.co/IDsEBv6O8Q
The best thing about giving your team real data is what they do with it.
Jack Russell, Owner of Rolar Products, joined Gabe Maentz on the First Down Webinar Series and shared what happened when his operators started watching the Datanomix screens, doing their own math, and coming to him with insights he didn't even ask for.
That's the part nobody talks about when they talk about #MachineMonitoring. The data doesn't just improve your numbers. It improves your people.
Find out what that looked like for Jack and what it could look like for you here: https://t.co/guubm5GC27
#ShopFloor #PrecisionManufacturing #Datanomix #FirstDown #CNCMachining #ManufacturingLeadership