Ben Thompson

[Ben Thompson @Gamer260]

@repkord I know a product that I would love to see a revision of is the wall mounted repbox but a indx compatible one for 8 spools.

[Ben Thompson @Gamer260]

@dhewlett I would check the hard drives you might have one starting to go bad I had one die on me a while back and would cause random crashes, hang ups and other problems and it was just a storage drive that was rarely used.

[Ben Thompson @Gamer260]

@3dpNero @ChoiceHotels That’s sort of disappointing to hear that I was possibly considering that location if things panned out and I could go. Expedia still has them listed as still available for reservation’s hopefully that will get corrected before others get in a bind.

[Ben Thompson @Gamer260]

@Gioteya72 I just printed it how it was uploaded I plan on doing it scaled up later today. If I had any feedback is that on the bottom edge of the tentacles on the first couple layers I would love to see it flat/connected to the bottom of the model instead of printing it in the air.

[Ben Thompson @Gamer260]

@SliceWorx3D That’s a slightly hard choice for a printer I have not kept up with the ones on the market now. I think the choices would be raise3d, seemecnc and maybe anycubic if I had to pick a brand. A print I have been wanting to do for years is a giant glow in the dark trex skull.

[Ben Thompson @Gamer260]

@MattStultz King’s quest 4 maybe?

[Atomic Filament @AtomicFilament]

Want to win a spool of our New Cosmic Ray Blue PLA?

To enter just retweet this tweet and follow @atomicfilament here on twitter, simple as that

We will pick 5 lucky winners next week

Available within the US only

3…2…1…GO!

https://t.co/2sP6REZKuL

[Ben Thompson @Gamer260]

@apyrodesign @alienslacker @SirayaTech I look at this and feel like it could make a neat effect on a case fan if it could be shaped to be functional at speed.

[Ben Thompson @Gamer260]

@UncleJessy4Real I recently had the same thought about stop using the cans and went with this one it’s charged by usb and seems to have a decent amount of run time at least for the use case for me. https://t.co/kxLnjrKZxh

[Ben Thompson @Gamer260]

@IC3D_Printers @MidwestRRfest I wish I could make it this year I am 4 and half hours away but gas and hotel is to much for the budget this year.

[Ben Thompson @Gamer260]

@WhamBamSystems I got a ender 3 max what exact measurements are you looking for bed size or?

[Ben Thompson @Gamer260]

Well I don’t think @MidwestRRfest is going to happen for me this year sadly. Work is basically shut down and I don’t think it’s going to be in the budget with the gas prices. I will keep hoping something works out but it’s not looking likely.

[Ben Thompson @Gamer260]

@joeltelling @Gambody_com @3DGloop @loyalmoses @Prusa3D @PrintedSolid LEDs are done on the star destroyer so another big project wrapped up.

[Ben Thompson @Gamer260]

Some more better shots while not completely in the dark @loyalmoses @joeltelling @Gambody_com @3DGloop

[Ben Thompson @Gamer260]

@joeltelling @Gambody_com @Prusa3D @loyalmoses @3DGloop First pass of LEDs done on the Defiant some final touch ups are still needed but it’s coming along.

[Ben Thompson @Gamer260]

@Gambody_com Defiant is almost done all that’s left is the wiring and the stand. @loyalmoses @joeltelling

[Ben Thompson @Gamer260]

@joeltelling I have someone asking me to print them a model for them but I am unsure what would be the best way to go about pricing it for them.

[Ben Thompson @Gamer260]

So I am trying to figure out what I plan to do for my next project to work on. I basically have 2 that most likely be in the same range in print time and parts as the one I just finished or try something else it’s hard to choose but only one printer to do it all.

[Ben Thompson @Gamer260]

Apparently I forgot a engine

[Ben Thompson @Gamer260]

It’s 99% Done with 2 parts left but was printed on the @Prusa3D MK3, 4 and half months of work uses 9 rolls of @PrintedSolid design white and held together with @3DGloop this model by @Gambody_com is a monster at 3 and half feet long. @loyalmoses @joeltelling