Jeandre Groenewald

I am a maker from Namibia.

[Jeandre Groenewald @Jeandre_11]

Lithophane lightbox

Filament: SA Filament Hyper PLA Cool White
Printer: @LDOmotors Voron 2.4
Frame: https://t.co/EnOYpeBMFY

#3dprinting #3dprint

[Jeandre Groenewald @Jeandre_11]

I always wanted bigger printers, but lately I have come to the realization that a 180×180 printer is actually perfect for having on a desk for prototyping and as a daily driver; most things I print fit that print volume.

This is on my future build list.
https://t.co/L2Zn4hKM8U

[Jeandre Groenewald @Jeandre_11]

@cyanidesugar_ Honest unsolicited advice: if you can, wait for the v2.

[Jeandre Groenewald @Jeandre_11]

If it goes into production, I get credited, receive an affiliate commission, or get sent the product.
Just a mutually beneficial partnership.

I am not saying my ideas are best or even good, but it is only when implementing them that you find out. 2/2

[Jeandre Groenewald @Jeandre_11]

I am still hoping to work with a company in the industry one day with whom I can bounce ideas off of.
Say I have an idea for filament type and color; they either tell me that is a good idea or a bad idea and why it can work and can't work. #3dprinting #3dprint 1/2

[Jeandre Groenewald @Jeandre_11]

@esun3dfilament Temperature Color Change TPU

#3dprinting #3dprint

[Jeandre Groenewald @Jeandre_11]

I would love matte PLA and TPU in this color palette🙏.

More earth tone filament in general would really be great.

#3dprinting #3dprint

[Jeandre Groenewald @Jeandre_11]

@gonecozycrafts This is a video just posted by Prusa: https://t.co/drdqHWFEyd

[Jeandre Groenewald @Jeandre_11]

First time printing with SA Filament 95A TPU

Printer: @LDOmotors Voron 2.4

#3dprinting #3dprint

[Jeandre Groenewald @Jeandre_11]

@TGAW @headamame It's a wonderful keepsake. I am really sorry for your loss.

[Jeandre Groenewald @Jeandre_11]

Dialing in my lithophane settings for SA Filament Hyper PLA Cool White

It is my new favourite filament for lithophanes.
I still need to dial in my retraction settings for lower layer heights.

These values give the best contrast:

Minimum Thickness: 0.6
Maximum Thickness: 3.2

[Jeandre Groenewald @Jeandre_11]

Parametric Spool Lamp progress

#3dprinting #3dprint @openscad

[BIQU @BIQU_Makers]

🐼🍪 𝐏𝐚𝐧𝐝𝐚 𝐓𝐫𝐞𝐚𝐭 𝐩𝐫𝐞-𝐬𝐚𝐥𝐞𝐬 𝐚𝐫𝐞 𝐋𝐈𝐕𝐄!

The wait is over — it’s officially time to Treat yourself. ✨

In 𝐣𝐮𝐬𝐭 𝟑𝟎 𝐬𝐞𝐜𝐨𝐧𝐝𝐬, the clip-on, clip-off Panda Treat turns your 3D printer into an edible ink printer. 🖨🍰

𝐏𝐫𝐢𝐧𝐭 𝐞𝐝𝐢𝐛𝐥𝐞 𝐝𝐞𝐬𝐢𝐠𝐧𝐬 𝐨𝐧𝐭𝐨 𝐜𝐨𝐨𝐤𝐢𝐞𝐬, 𝐜𝐚𝐤𝐞𝐬, 𝐝𝐫𝐢𝐧𝐤𝐬, 𝐚𝐧𝐝 𝐦𝐨𝐫𝐞.

Ready to create something delicious?

👉 𝐎𝐫𝐝𝐞𝐫 𝐡𝐞𝐫𝐞: https://t.co/4I6QzVNiOB

𝐖𝐚𝐧𝐭 𝐭𝐨 𝐰𝐢𝐧 𝐨𝐧𝐞 𝐢𝐧𝐬𝐭𝐞𝐚𝐝? 🏆🐼
Enter our launch competition here:

👉 https://t.co/E9EsODl8Tq

#PandaTreat #EdibleInk #InkrEdible #3DPrinting #CookieDecorating #CakeDecorating

[Jeandre Groenewald @Jeandre_11]

I would really like a @printablescom OpenSCAD customizer🙏.
@Prusa3D #3dprinting #3dprint

[Jeandre Groenewald @Jeandre_11]

Redesigning my customizable empty spool lamp to be fully parametric.

The lamp stand is fully parametric and adjusts depending on the spool outer diameter entered.

#3dprinting #3dprint @openscad

[Jeandre Groenewald @Jeandre_11]

@gonecozycrafts @DIYMaker_Johan @Creality3dP This YouTuber has some really good videos on injection molding and recycling. https://t.co/lz2Xe29Q6O

[Jeandre Groenewald @Jeandre_11]

I have reached 1000 downloads on MakerWorld🥳🥳😍.

#3dprinting #3dprint

[Jeandre Groenewald @Jeandre_11]

@E3DOnline I have a Voron 2.4 300 that is soon to be joined by a Voron 2.4 350 dual-toolhead StealthChanger.

[Jeandre Groenewald @Jeandre_11]

Is there perhaps any chance that @Prusa3D would be willing to sponsor your @prusament ASA Signal White and ASA Prusa Orange for my build. My frame is space grey, this is my idea for my build. I have been struggling to find suitable filament locally.

#3DPrinting #3dprint

[Jeandre Groenewald @Jeandre_11]

My @LDOmotors Voron StealthChanger kit has arrived in South Africa🥳🥳😍.

I want to thank @LDOMOTORSJASON very much for the really good discount and shipping my kit for free to South Africa.
Jason has supported me so much on my journey. 1/3

#3DPrinting #3dprint