MADRAS project

.@EU_H2020 project to develop advanced materials for the mass production of #OLAE #PrintedElectronics products. This account only reflects the author view

[MADRAS project @MADRAS_Project]

The #MADRAS project has come to a close!

For keeping up to date on #printedelectronics make sure to follow @Eurecat_news @genesink @tecnopackaging @TNO_Research @infinityPV @UniPardubice @FedrigoniPapers

[MADRAS project @MADRAS_Project]

New #MADRAS scientific publication! ✍️

This article investigates the potential of tuning donor #polymer molecular weight to address the upscaling of #OPV through simple synthetic routes, high active layer thickness tolerance or stable organic #solarcells

https://t.co/PyhjMpIcD5

[Sergi Riera-Galindo @Riera_Galindo]

Our latest publication in Small unveils the impact of molecular weight polymer on boosting the performance and thermal stability of organic solar cells.🌞
Our research prioritizes industrial viability in OPV.

[MADRAS project @MADRAS_Project]

This week, Cristina Casellas from @Eurecat_news has presented the geotracking flexible tag developed within #MADRAS during a workshop on #packaging and #logistics

The event was organised in #Madrid by the @ClusterFPrint together with @PT3NEO and @itene

https://t.co/wlKxqiFljV

[Sumindustria @sumindustria]

Cooltra participa en el desarrollo de un sensor de huellas dactilares para desbloquear sus motos eléctricas compartidas.
https://t.co/lZXA35f8Kn

[MADRAS project @MADRAS_Project]

👉 Partners from @tecnopackaging discussed #MADRAS outcomes during the #EUIndustryDays celebrated in Málaga

The project was highlighted as one of the key projects that the company has participated in

https://t.co/P90rHuDmkR

[MADRAS project @MADRAS_Project]

📰 European research group creates injection molding plastic solar cells

via @pvmagazine #MADRAS

https://t.co/Pk5bRXysPU

[infinityPV @infinityPV]

New: „Injection Molding Plastic Solar Cells“ in @AdvSciNews
Here, a lot of materials as well as advanced processing and characterization equipment from @infinityPV were used. Thx @MADRAS_Project for the support.
🤓 https://t.co/VDrBzRByq8 #OpenAccess
🤓 https://t.co/vUHgjk1kEp

[MADRAS project @MADRAS_Project]

📚 New scientific article from #MADRAS partners!

This paper demonstrates, for the first time, the large-scale fabrication of organic photovoltaic modules #OPV embedded into structural plastic parts through industrial #injectionmolding

📑 @AdvSciNews

https://t.co/beEPADpBLu

[MADRAS project @MADRAS_Project]

Laura López, #MADRAS technical coordinator from @Eurecat_news, has presented the outcomes of the project during the #PrintedElectronics Helix launch

She introduced the geotracking flexible tag and in-mold organic solar modules developed in MADRAS ☀️

https://t.co/dMLletBkvs

[MADRAS project @MADRAS_Project]

Next 21/09, Laura López Mir, technical coordinator from @Eurecat_news, will present #MADRAS results in the Printed Electronics Helix launch event

The event will discuss the state of the art of #printedelectronics bringing top-notch experts

Registration:

https://t.co/CrsSb5qvny

[REFORM Project @reformprojecteu]

Printed Electronics are a revolutionary next step in how we manufacture our technology and electronics, as said by @MADRAS_Project.

The #REFORMProject seeks to develop #PrintedElectronics that will put an end to much of the e-waste in Europe 🇪🇺

🖥️ https://t.co/bv7cVWuvCX

[CASADOMO @CASADOMO_COM]

El proyecto @MADRAS_Project ha presentado nuevos materiales flexibles con propiedades eléctricas y ópticas para fabricar #Dispositivos como #LectorDeHuellasDactilares o #EtiquetasInteligentes #Domótica @Eurecat_news Artículo en @CASADOMO_COM

https://t.co/THxV6M60Ap

[MADRAS project @MADRAS_Project]

Paula Pinyol, project partner from @Eurecat_news, has recently displayed a poster based on #MADRAS knowledge at the #ISFOE23 conference by @NANOTEXNOLOGY_

👉 The poster presents the production of in-mold organic photovoltaic modules boosted by MADRAS

https://t.co/aSLMEvalBz

[MADRAS project @MADRAS_Project]

👉 Which have been the main objectives of #MADRAS?

👉 What benefits has provided to the society and industry?

Learn more about the outcomes of the project in this interview with Rosa Araujo, coordinator from @Eurecat_news 📺

https://t.co/XrbKUytYfJ

[MADRAS project @MADRAS_Project]

The #MADRAS project has been focused on the development of new materials for #printedelectronics

Fully roll-to-roll #R2R processed organic solar modules were prepared with these materials using roll-to-roll coating and printing techniques

Learn more 👇

https://t.co/f527FCwdIH

[MADRAS project @MADRAS_Project]

📢 The #MADRAS sixth newsletter is out!

👀 This issue recaps the project outcomes, providing information on the three demonstrators developed, video interviews or specific infosheet based on key deliverables #printedelectronics

🔗 https://t.co/g4W1wsWvP9

[MADRAS project @MADRAS_Project]

📽️ [INTERVIEW]

Laura López, Researcher and #MADRAS Technical Coordinator from @Eurecat_news, explains the main advances in the state-of-the art that the project has achieved

👉 She also introduces the main techniques used and the project demonstrators

https://t.co/1zifJdkid4

[MADRAS project @MADRAS_Project]

We have been present at the #TAPPINano conference!

Partners from @FedrigoniPapers exhibited a poster based on #MADRAS research

The poster presents the cellulose #phosphorylation process followed to produce high-quality cellulose nanomaterials

https://t.co/c1jZ9WGMiJ

[MADRAS project @MADRAS_Project]

Partners from @Eurecat_news and @infinityPV have recently shared #MADRAS achievements at the #HOPV conference on hybrid and organic #photovoltaics organised by @nanoGe_Conf

They presented a flexible photovoltaic module developed within the project ☀️

https://t.co/D2GfmpJEwc

[MADRAS project @MADRAS_Project]

#MADRAS partners are at @cooltra facilities validating the fingerprint reader developed in the project

This reader consists of a photodetecting fully printed frontplane based on advanced materials and in-mould electronics #IME processes

More info:

https://t.co/s1dPe33mOg