Max K

[Tom Dörr @tom_doerr]

Charges and ejects batteries automatically

https://t.co/VOESjIqPqy

[Max K @MaxK94]

New project: Zicada - DIY Zigbee Multisensor https://t.co/ct30E4HtjN

[IEEE Spectrum @IEEESpectrum]

A DIY Charger That Makes NiMH Batteries Easy to Use https://t.co/OsN6QILatd

[Max K @MaxK94]

@blind_via I guess this lines the ESP32 up nicely with the feedpoint of the antenna while giving it space to fan out the pins on a low cost PCB. At 90 degrees the chip would either be flush with the red connector or the feedline would be longer.

[designboom @designboom]

3D printable gamepad by @MaxK94 plugs directly into smartphones for portrait-mode playing https://t.co/FzmVNhoJ4g

[Max K @MaxK94]

@ericmigi I always saw the Pebble Time as the "real Pebble". I would want nothing more for the reboot than the Time 2 that was canned before release.

[hackaday @hackaday]

The Automatic Battery Charger You Never Knew You Needed
https://t.co/gPgaxIkYdb

[XDA @xdadevelopers]

Thanks to the open-source community and the Raspberry Pi Pico, you can easily build this retro clock that also charges your NiMH batteries. https://t.co/nGVyxSEpjW

[Tom's Hardware @tomshardware]

Handy Raspberry Pi battery charger doubles as attractive desk clock https://t.co/lkWOoYBJh6

[Hackster.io @Hacksterio]

This over-engineered battery charger automatically loads up dead NiMH AAs. https://t.co/naWJKFct5Y

[Max K @MaxK94]

@JasperEllens @DJIGlobal Info on the #DJINEO battery and two way charger is online from Mediamarkt.

[Max K @MaxK94]

@arturo182 Well that pretty much just happened 😅

[Max K @MaxK94]

Wow, OMOTE reached 1K stars on GitHub 🤩

Thank you to all the contributors!

https://t.co/BdUYgQ37ps

[Max K @MaxK94]

@eevblog @altium Well, at least they know their way around a PCB ... oh

[Max K @MaxK94]

@martinfasani That PCB gets worse and worse the longer you look at it. Parts are placed like it's just trying to distribute them evenly, regardless of functionality. All traces have the same thin width and clearance. A regular auto router could do a better job without AI.

[Max K @MaxK94]

@arturo182 This year's main project was a universal remote: https://t.co/ljXNint7vn

[Make Magazin @MakeMagazinDE]

heise+ | ESP32-Workshop: Bedienoberflächen mit LVGL-Grafikbibliothek selbst gestalten https://t.co/muoE9cCzcL #Design #Mikrocontroller

[Max K @MaxK94]

@AislerHQ Cool! Can you tell me what the vise is in this picture? Looks similar to a Hakko Omnivise.

[Max K @MaxK94]

@thijstriemstra Sure, it's the miniware MHP30 (mini hot plate 30mm): https://t.co/vyyK1Y1nOP

[Max K @MaxK94]

Finished my new project: OMOTE - Open Universal Remote https://t.co/r5LSpAEO7p