1990s technology is fascinating, especially light propulsion. Instead of launching a spacecraft with massive amounts of chemical fuel, you leave the heavy power source on the ground and beam energy directly to the spacecraft to propel it. The spacecraft carries less weight because the power source stays behind.
The crafts you see used in experiments with light propulsion are shaped kind of like an acorn or a cone and the bottom is a polished parabolic mirror. A pulsed ground laser (usually a 10 kW carbon dioxide laser that fires around 1 kJ pulses) hits a mirror and becomes focused into a thin ring of air underneath the vehicle. The energy density is high enough that the air breaks down into a plasma almost instantly and temperatures jump to tens of thousands of kelvin in microseconds. The sudden heating creates a rapid expansion and then a string of tiny detonations. Each pressure pulse shoves against the craft and pushes it up.
While it’s still low enough in the atmosphere the working fluid is just the surrounding air, so the specific impulse is ridiculously high. Once the air gets too thin though, it can just switch modes and start ablating a little onboard solid propellant (they often used something like Delrin) or a bit of hydrogen. So, same focusing optic but using a different propellant. To keep it from tumbling, they spun the craft up to around 10,000 RPM before launch so the gyroscopic effect would hold it stable.
Lightcraft Technologies was one of the first groups actually trying this with help from NASA and the Air Force Research Lab. In October 2000 at White Sands, a little 12.2 cm, 50 gram prototype actually flew to 71 meters (233 feet) on that 10 kW laser. It didn’t make it to orbit (obviously) but it proved the air breathing pulsed detonation cycle could work.
This is how a truck of scrap becomes an H-beam, and the clever part is the shape it's cast in.
An electric arc furnace melts the scrap, the steel goes through a caster, and out comes a red-hot dog-bone that already looks like a beam. So the rolling mill only has to finish it, instead of squeezing a big rectangular block into shape.
The catch is the scrap The furnace can't take copper back out, so whatever goes in stays in. Beams can live with that car-body sheet mostly can't. The melt alone costs roughly 400 kWh of electricity per tonne.
Video: animax4d
The Thing about South africans is that they dont need their stars to go Europe to be considered relevant.
They invest in themselves enough to bring stars from Europe To Them and now everyone is talking about them.
Look at This ❤
@FootballKe_90 Honestly Ingwe FC walicheza kwa pitch mbaya sana these teams should improve in pitch choices,because such surfaces you can't expect much
Cycling is bad for the economy.
A cyclist doesn’t buy the car/car insurance/fuel/spare parts and service and doesn’t use paid parking. He is healthy and doesn’t buy drugs.
Walking is even worse. They don’t even buy a bicycle.