Protool Precision

PROTOOL PRECISION SHARPENING
Annular Cutters/Drills/End mills
Precision sharpening & grinding services to Engineering, Construction & Fabrication industries

[Protool Precision @ProtoolSharp]

At Protool Precision we will return your cutters in original cutting condition, geometries and specifications.
All done on our precision tool and cutter grinders, we grind all cutters locally in our Perth workshop, we do not outsource tooling.

[Protool Precision @ProtoolSharp]

We grind drill inserts in house on our precision grinding equipment, these inserts will cut like new again.

[Protool Precision @ProtoolSharp]

These Countersinks were ground using our special relief grinding attachment, they are measured for correct relief before leaving the workshop and will perform at their best again.
#protoolprecision
#countersinkbit
#countersinks

[Protool Precision @ProtoolSharp]

Precision regrinding of all annular cutters is done on our annular cutter regrinding machine, bringing your cutters back to their correct geometries is applied to all annular cutters no matter the condition.
#protoolprecision
#annularcutters
#annularbroach
#perthsharpening
#hss

[Protool Precision @ProtoolSharp]

Have your drill reground professionally at Protool Precision Sharpening Services Perth Western Australia.
We specialise in precision regrinding of drills in house.
#protoolprecision
#drillgrinding
#drillsharpening
#toolandcuttergrinding
#precision
#hsstooling

[Protool Precision @ProtoolSharp]

Endmills and Slotdrills are Precision ground in house, no matter the condition we can have them returned to their full cutting potential again.
Perth's only specialist endmill regrinding service.
#protoolprecision
#endmillsharpening
#toolandcuttergrinding
#hsstooling

[Protool Precision @ProtoolSharp]

Protool Precision Perth Western Australia is grinding Slotdrills and Endmills on our Precision cutter grinding machine, ends and flute grinding is performed by our grinding experts to return your tools back to optimum cutting performance again.

[Protool Precision @ProtoolSharp]

Cembre rail cutters are ground in house on our precision annular cutter grinder, maintenance of all cutting geometries is achieved accurately for continued optimum performance.

[Protool Precision @ProtoolSharp]

Cleaned, ground & ready for work again, minimum size reduction after grinding, 0.25mm overall diameter reduced, Lot's of life left in this cutter. #slotdrill #endmill #Mitutoyo #toolgrinder #sharpeningperth #ProtoolPrecision
[email protected]

[Protool Precision @ProtoolSharp]

Measuring all cutters before and after grinding. Minimum material removal to minimise cutter size reduction. #Mitutoyo #Endmills #Slotdrills #toolgrinder #Sharpening
[email protected]

[Protool Precision @ProtoolSharp]

Don't through these out after breaking, we can restore this to original geometries and specifications, full restoration is still much cheaper than replacing. This 30mm cutter was restored for only $30 AUD.
#restoration #annularcutter #sharpening
[email protected]

[Protool Precision @ProtoolSharp]

After sharpening as per original cutting geometry, precision ground to an extreme sharpness.
Perth's specialist annular cutter sharpening service is available for immediate tool servicing.
[email protected]

[Protool Precision @ProtoolSharp]

#Annular cutters are re-ground to highest precision and sharpness, will perform as new with manufacturers original geometries maintained and restored. #precision #cuttergrinding #protoolprecision
[email protected]

[Protool Precision @ProtoolSharp]

#Countersink grinding specialists, get them done right, correct relief is critical using cam relief #grinding
[email protected]

[Protool Precision @ProtoolSharp]

Specializing in precision end mill sharpening, servicing Perth's engineering and machining community. #endmill #Engineering #fabrication #Sharpening
[email protected]

[Protool Precision @ProtoolSharp]

We sharpen carbide compression cutters, 2 and 3 flutes. Get in touch with us for prompt service.
[email protected]
https://t.co/QXlUjSZKpW
#compressioncutters #toolandcutter #carbide #cuttergrinding

[Protool Precision @ProtoolSharp]

Compression cutter grinding.
#compressioncutters #protoolprecision #sharpening #toolandcuttergrinding
[email protected]
https://t.co/QXlUjSZKpW

[Protool Precision @ProtoolSharp]

After sharpening, like new again.
#annularcutters #sharpening #newagain
[email protected]
https://t.co/QXlUjSZKpW

[Protool Precision @ProtoolSharp]

Before sharpening can be a bit worse for wear. #annularcutters #sharpening #blunt #protoolprecision
[email protected]
https://t.co/QXlUjSZKpW

[Protool Precision @ProtoolSharp]

Sharpened End mills, Sharpened ends and flutes, finished ready to go out. #endmills #toolandcutter