Daniel Koz

CWNE #217. 60GHz, 802.11ad, 802.11ay, Terragraph, mmWave, GROL, UBWA, AD6DL. IgniteNet Edgecore Field Application Engineer

[Daniel Koz @RFManDan]

@pearlythingz Do a go-fund me to finish your documentary.

[Daniel Koz @RFManDan]

@wirelesslanpros @samuel_clements @Mae149 Can you please send me a link too? Thanks!

[Daniel Koz @RFManDan]

@rose_alibi A little melty. Wonder what the current draw is!?

[Daniel Koz @RFManDan]

@elonmusk What is the average bandwidth and ping time between all 250K subscribers? @SpaceXStarlink

[Daniel Koz @RFManDan]

#60GHz farthest PtP link is now over 27km! https://t.co/7b6i1TID6u

[Daniel Koz @RFManDan]

Is #60GHz dead? As far as indoor WiFi is concerned I would say -yes- but certainly not for PtP and PtMP WISP applications. Radios with ch.5 and 6 (outside the o2 absorption range) are getting 10+km 1+gbps for a fraction of the cost of 70/80GHz licensed.

[Daniel Koz @RFManDan]

The lack of backward compatibility with #WiFi6e makes for an entirely different animal than previous GEN WiFi. To truly support all devices in both bands without compromising performance, TRI-radio AP's will be required.

[Daniel Koz @RFManDan]

If you're having problems with a Windows 10/11 laptop connecting to WiFi6/6e AP's you may need to update the drivers. It's probably not the AP. @CWNP https://t.co/j3irVUU3Hm

[Daniel Koz @RFManDan]

@DevinAkin Never heard of an AP being able to tx a radar event? Do tell.

[Daniel Koz @RFManDan]

@HankYeomans Awesome! Wish they had one for Twitter and FB!

[Daniel Koz @RFManDan]

@AjitPai @MatthewBerryDC 60GHz: Disrupts Oxygen in hemoglobin

[Daniel Koz @RFManDan]

@cantechit Let’s not forget about 2160000kHz for 802.11ad/ay 😆

[Daniel Koz @RFManDan]

@metageek @americanmcneil It's okay, you're forgiven. Ok now when you guys going to make one for #60GHz @WISPAnews #wisps would eat them up.

[Daniel Koz @RFManDan]

@Uther1999 @EmperorWiFi https://t.co/he7ctXMXhY

[Daniel Koz @RFManDan]

@Uther1999 @EmperorWiFi The closest thing that I know of that really exists is this: https://t.co/Zvz28yqMVT

[Daniel Koz @RFManDan]

@EmperorWiFi It's odd there is so little info on Havana Syndrome. No frequency, just vaguely says "microwaves". Certainly weird stuff! https://t.co/gVtjxrUbUd

[Daniel Koz @RFManDan]

@Cubist877 @60ghz Typical power of 60GHz 802.11ad or 802.11ay radios are 20dBm (100 milliwatts) or less. The speed comes from really wide RF channels. Channels can be 2.16 or 4.32GHz wide or even more.

[Daniel Koz @RFManDan]

@KeithRParsons If it's just one building needing 20MHz channels, how many AP's are there? What about setting manually 5GHz channels just for those AP's?

[Daniel Koz @RFManDan]

@grcate @scottm32768 I think it could. All antennas have nulls. An example, there is a huge null directly under a vertical omni. I can see rotating antennas horizontally for a 2 story house may help. Moving an antenna just a few degrees can move a -20dB null. We will have to see on this one.