Rack Robotics

Building 🇺🇸 America’s next-generation robotic tools | wire EDM ⚡️

[Rack Robotics @RackRobotics]

The Powercore V3 is out of pre-order! All new orders should ship in 2-4 weeks.

The Powercore V3 is our most capable spark generator yet. Passively cooled and extremely fault resistant to those just learning EDM or running open loop systems.

Grab yours today with this link! 👇

[Rack Robotics @RackRobotics]

IP68 waterproof inductive sensors. These are really neat little components!

I circuit board directly soldered to wires is placed in a small ABS(?) box and coated in a rigid, opaque epoxy.

This is probably the best way of waterproofing electronics for long term submersion

[Appreciated Cooper | Ценный Купер @CooperZurad]

That's a lot of waterproof inductive probes. Intended for Betta Wire distribution

This is the year WAGMI.

[Rack Robotics @RackRobotics]

@TheDarkGoldMan perfect

[Rack Robotics @RackRobotics]

Cooper has been working hard. Parts are arriving. Work is being done.

To be clear, this is Cooper typing this and I'm back at work at 9:30 again to keep working.

Doing our best to take care of everyone

[Appreciated Cooper | Ценный Купер @CooperZurad]

Components arriving

[Rack Robotics @RackRobotics]

Rack Pro-2 seen in the wild!

Small self note here, we need to do a better job with the outside finish on the sealant. Some comes out during application and curing.

We should run an external bead for aesthetics

[Hoffman Tactical @HoffmanTactical]

Little WEDM cutting metal. It's pretty cool.

[Rack Robotics @RackRobotics]

Site and email down due to DNS error. Working on fixing this.

[Rack Robotics @RackRobotics]

@DSloan85710 We and our customers have found success with distilled water and filtration. We are able to add deionization for an additional fee.

[Rack Robotics @RackRobotics]

Assembling kits and running on belt driven hardware was not enough for many of our business customers.

They wanted something with precision, stability, and filtration right out of the box.

INTRODUCING THE RACK PRO-2, an affordable, Western, turnkey WEDM machine.

[Rack Robotics @RackRobotics]

@mikeofpol @stupidchuddy HAHAHAAHAHAHAHAHAHA

[Appreciated Cooper | Ценный Купер @CooperZurad]

I made a turnkey WEDM machine for businesses.

I've never made such a large, heavy machine before, but it works very well.

I really like it, and I hope you do too.

(YT link below)

[Rack Robotics @RackRobotics]

Easier link access: https://t.co/xKltGF6KWJ

[Rack Robotics @RackRobotics]

Finally, Western companies and schools can access wire EDM in an affordable, secure, and easy to work with form factor.

The Rack Pro-2 is available now, starting at only $15,000. Stock configuration, or with your customizations.

Spec sheet and purchase link available at https://t.co/Hs4pi6ASjR.

Please email for customization requests.

[Rack Robotics @RackRobotics]

We made the Rack Pro-2 to fill that niche.

Low power consumption (under 1500W), low cost (only $15K), and secure to work with (open firmware)

[Rack Robotics @RackRobotics]

@CanuckCreator @astrorahul_ @realwillreil We've been talking to some metal AM suppliers about options. We might have a solution for them ;)

[Rack Robotics @RackRobotics]

@damned_docs @_Stocko_ Common question. No, it is not a useful way to machine PCBs

[Rack Robotics @RackRobotics]

@NotaGuntuber Cooper is a chill, relaxed guy. Not sure where this came from??

[Rack Robotics @RackRobotics]

@Xaraphim It really works. Anything you want to see cut?

[Rack Robotics @RackRobotics]

We have a new video on the Betta Wire up on Youtube!

In this video we make a part for the Betta ON the Betta.

Check it out here!👇

[Rack Robotics @RackRobotics]

@i2cjak we have too much RESPECT to EVER A/B test our audience

[Rack Robotics @RackRobotics]

What would you like to see cut with wire EDM? We're thinking gears, knives, pressure locking parts, etc.

https://t.co/pNH6Dyy5ps