Andy Hunt

Farmer Lameroo S.A

[Andy Hunt @andyhunt89]

@1800weevil @CLAASHC @KondininGroup @DrJewmelon @tractoroftheyar Ben, What’s the judging criteria, does any of it come from field performance ? And do non euro tractors/gear ever win awards?

[Caroline Di Russo @CaroDiRusso]

When an ignorant inner-city class-warfare narrative gets demolished by real world numbers.

Delish.

[Andy Hunt @andyhunt89]

@JoshGarlepp *****Allegedly

[Andy Hunt @andyhunt89]

@AdamMorgan77 @farley_mick @AndrewThomfarms @James_Stacey_ November becoming the wettest month of the year three years running.

[Andy Hunt @andyhunt89]

@AdamMorgan77 @farley_mick @AndrewThomfarms @James_Stacey_ I was wondering if you were getting anything, looked angry from header set looking west but thought you’d got away with it according to your mesonet station.

[Andy Hunt @andyhunt89]

@matthewvandy Cheers, is yours hydraulic fore/aft or manual?

[Andy Hunt @andyhunt89]

Fellow John Deere 740/745FD operators, what’s the remedy for bulldozing/pushing dirt through the middle section. Skid plates are in good condition, operating at 100-120Bar, frequently calibrating on level ground none of it helping.

[Andy Hunt @andyhunt89]

@weatherzone Keith, SA?

[Andy Hunt @andyhunt89]

@LiddellClaying @PatrickJaeschke @ClaySpreading @clayspread Aaron, What machines are you seeing give best results for mixing that 100-150mm? Patrick what rates are you spreading at, do you find that spader can make clay disappear 200t and below?

[Andy Hunt @andyhunt89]

@cropmad @johngbennett https://t.co/eTdglSdqAj

[Andy Hunt @andyhunt89]

@C4Countdown @Channel4 @benhanlin @susie_dent @ColinMurray @RachelRileyRR @DamonPerks

[Andy Hunt @andyhunt89]

@HartFieldDay @Needsy33 @Josh_Barrett2 @Steery36

[Andy Hunt @andyhunt89]

@andrewefridgway What’s your base that the Rombus pad is on? rubble, clay any prep required other than leveling?

[Andy Hunt @andyhunt89]

@Howelly_Agro Dr Nozzle in Adelaide

[Andy Hunt @andyhunt89]

@LukeGra10871416 What product did you use?

[Andy Hunt @andyhunt89]

JD S680 owners with powercast and seed terminators can you share with me what you’ve done to make straw work @seed_terminator

[Andy Hunt @andyhunt89]

Busted Bearing on Cam Roller, specific to new V Knotter I think, thanks for the input, remember for next time

[Andy Hunt @andyhunt89]

Good Morning Krone HDP II owners, have you ever had this issue? We have tried adjusting twine finger/pusher forward but with no success, it effectively wrecks two bales loosens string on pictured bale and rips string off next bale in line, any suggestions?

[Andy Hunt @andyhunt89]

Should clarify, it’s the new v knotter, no off cuts/tails but adjustment’s for the most part should be relatively the same