Been realizing that consistency is really underrated.
You don’t need to have everything figured out. Just keep learning, keep showing up and keep improving little by little.
The results usually come later.
Just don’t disappear on yourself.
@m477lander@phantom@base the burner in the post is still on basescan. remove killed 7702. usdc to allowanceholder is still sitting there.
https://t.co/VWbHktN5lX
thats why revoke says not enough eth after the flip. wipe both while its sponsored.
@m477lander@phantom@base enable was 2 usdc→weth. no spender, cap, or expiry. remove killed 7702 on revoke. allowanceholder still max. paymaster still 0.006. costume off, key stays. thats why revoke says not enough eth. zero both while sponsored, then flip.
Gasless worked. Removed lied.
7702 came off, the USDC slot on allowanceHolder didn't no expiry, near. Max and revoke wants ETH the flow never funded
Show the approve next to the 2 USDC which wipe both spenders before you flip the wallet back to an eoa
@anaihilate@m477lander@phantom@base The button is named after the 7702 bit so that's all it runs.
Cleanup that still needs the sponsor has to sit in the same tx as the teardown, not a second click after the path is already dead
@anaihilate@m477lander@phantom@base they yank 7702 first so the sponsored path is dead before the allowance is.
flip the order. approve(0) on AllowanceHolder and the paymaster while gas is still covered, then drop the temp code. Remove that does the flag first is how you get “not enough ETH
@m477lander@anaihilate@phantom@base dust is the leftover balance. The approval is the slot.
If they only sweep the 0.006 and leave the spender live, the next usdc that lands is still pullable. Wipe both because they were written in the same swap, not because one looks big
@tristan_bayona@m477lander@phantom@base yeah. that approve isn't capped at the 2 usdc.
Anything that hits this address later is already in range. Bridge, cex, payroll, doesn't matter, no second signature enable never said that.
Gasless worked. Removed lied.
7702 came off, the USDC slot on allowanceHolder didn't no expiry, near. Max and revoke wants ETH the flow never funded
Show the approve next to the 2 USDC which wipe both spenders before you flip the wallet back to an eoa
I keep saying this; show people what they're signing
Tried @phantom new gasless EVM swap on @base today.
Fresh burner. normal EOA. 0 eth. 5 used. Zero approvals.
Wallet:
https://t.co/lm3WsrtoFR
funding:
https://t.co/YqB1Me5622
Enable smart account delegation. Pay gas in USDC. swap 2 usdc for WETH.
Worked. No eth needed.
https://t.co/TrmlAZVUQG
Then Remove account delegation
Phantom removed it. Wallet is an eoa again.
https://t.co/ErkiSrLqUc
Opened @RevokeCash
7702 gone.
Two USDC approvals from that same swap still there
Near-max // Unlimited to @0xProject AllowanceHolder:
0x0000000000001fF3684f28c67538d4D072C22734
Plus paymaster 0x2cc0c7981D846b9F2a16276556f6e8cb52BfB633: leftover 0.006121 usdc. Dust
I signed it. That's the point.
Neither spender nor amount showed up on enable, swap review, or remove. I had to open an explorer and https://t.co/HDa1fj77tn to see what the swap had actually approved.
Phantom help article covers 7702, alchemy, temporary delegation, and remove. Not the token approvals. Not the amounts Not that they survive remove..
https://t.co/QjVaGBaXpk
@0xProject says AllowanceHolder is formally verified. Fine.
https://t.co/FzW1dTX6gf
Phantom still created a near-max approval, didn't show it, and left it after Remove
It has no expiry. Future USDC is covered too.
Old approvals already get people drained. @RevokeCash tracks more than $495M stolen through approval exploits since 2020 -
https://t.co/MdUXybksJH
ekubo in May 2026; 31 addresses, about $1.43M lost after a router bug met existing approvals.
Different contract The bug came later. The approvals were already there.
https://t.co/9J4p00E058
Tried to revoke both through https://t.co/HDa1fj77tn. It generated approve(0)
Phantom: Not enough ETH.
No tx
Gasless in. Native ETH to clean up after.
Nice.
Phantom own guide sends EVM users to https://t.co/HDa1fj77tn to inspect and revoke approvals:
https://t.co/ol24ulI2F7
@phantom, the swap worked. The permission UX didn't.
Show both approvals before I sign. Say exactly what Remove clears. Let me wipe the leftovers before you flip the wallet back to EOA.....
@m477lander@SAT20Labs@phantom@base Never on the card is the easy part, if remove still dumps you on an eoa with 0 ETH, I cab read the warning and still can't clear allowanceholder. Let the same sponsor pay the approve (0) before the flip
I keep saying this; show people what they're signing
Tried @phantom new gasless EVM swap on @base today.
Fresh burner. normal EOA. 0 eth. 5 used. Zero approvals.
Wallet:
https://t.co/lm3WsrtoFR
funding:
https://t.co/YqB1Me5622
Enable smart account delegation. Pay gas in USDC. swap 2 usdc for WETH.
Worked. No eth needed.
https://t.co/TrmlAZVUQG
Then Remove account delegation
Phantom removed it. Wallet is an eoa again.
https://t.co/ErkiSrLqUc
Opened @RevokeCash
7702 gone.
Two USDC approvals from that same swap still there
Near-max // Unlimited to @0xProject AllowanceHolder:
0x0000000000001fF3684f28c67538d4D072C22734
Plus paymaster 0x2cc0c7981D846b9F2a16276556f6e8cb52BfB633: leftover 0.006121 usdc. Dust
I signed it. That's the point.
Neither spender nor amount showed up on enable, swap review, or remove. I had to open an explorer and https://t.co/HDa1fj77tn to see what the swap had actually approved.
Phantom help article covers 7702, alchemy, temporary delegation, and remove. Not the token approvals. Not the amounts Not that they survive remove..
https://t.co/QjVaGBaXpk
@0xProject says AllowanceHolder is formally verified. Fine.
https://t.co/FzW1dTX6gf
Phantom still created a near-max approval, didn't show it, and left it after Remove
It has no expiry. Future USDC is covered too.
Old approvals already get people drained. @RevokeCash tracks more than $495M stolen through approval exploits since 2020 -
https://t.co/MdUXybksJH
ekubo in May 2026; 31 addresses, about $1.43M lost after a router bug met existing approvals.
Different contract The bug came later. The approvals were already there.
https://t.co/9J4p00E058
Tried to revoke both through https://t.co/HDa1fj77tn. It generated approve(0)
Phantom: Not enough ETH.
No tx
Gasless in. Native ETH to clean up after.
Nice.
Phantom own guide sends EVM users to https://t.co/HDa1fj77tn to inspect and revoke approvals:
https://t.co/ol24ulI2F7
@phantom, the swap worked. The permission UX didn't.
Show both approvals before I sign. Say exactly what Remove clears. Let me wipe the leftovers before you flip the wallet back to EOA.....