Bald Brewery

A computerised pico brewery in Yorkshire, UK

[Bald Brewery @baldbrewery]

has produced it's first batch of beer! :) Blog post and writeup to follow

[Bald Brewery @baldbrewery]

New blog post: Chiller testing ~ http://t.co/RHDjVqzMIT

[Bald Brewery @baldbrewery]

New blog post: Beer out valve fitted ~ http://t.co/23n2VR6xYI

[Bald Brewery @baldbrewery]

New blog post: Hop strainer and mash tun volume sensor ~ http://t.co/IyutydJnXi

[Bald Brewery @baldbrewery]

New blog post: Video: Mash Heat via HERMS coil ~ http://t.co/ALyJ76xi3E

[Bald Brewery @baldbrewery]

New blog post: Volume measurement electronics ~ http://t.co/KsvojPEm1d

[Bald Brewery @baldbrewery]

New blog post: HERMS coil fitted ~ http://t.co/MzUL5pvbkk

[Bald Brewery @baldbrewery]

New blog post: Network up and linked to live web interface ~ http://t.co/EHmz4cMQBC

[Bald Brewery @baldbrewery]

New blog post: Chiller temperature sensors complete ~ http://t.co/GI6mYBokKC

[Bald Brewery @baldbrewery]

New blog post: Upgrading the firmware ~ http://t.co/iHmwvRjMj8

[Bald Brewery @baldbrewery]

Three new blog posts - First wet test with mains water and electricity connected http://t.co/sfePq21Hdx

[Bald Brewery @baldbrewery]

@rypalmer QMax punches are great - most difficult bit is drilling a hole for them to be used. I bought mine in the UK - not sure about US

[Bald Brewery @baldbrewery]

New blog post - Overall view January 2014: http://t.co/0MtZfyAPpK

[Bald Brewery @baldbrewery]

New blog post - Mash tun out sight tube: http://t.co/D8THKkpbqm

[Bald Brewery @baldbrewery]

New blog post - repairing a valve: http://t.co/Eik6rgkUNk

[Bald Brewery @baldbrewery]

http://t.co/qKdKiHvYKa site is now live, with details of the project and current build status! :)