Paying $99/month was getting a little too expensive...
So I built my own open source alternative that now costs me LESS THAN $1/month to run.
YES, 99x CHEAPER! π€―
Introducing Open Post, an open source alternative to Post Bridge that lets you post to all your social media accounts from one dashboard.
I'll be open sourcing it on GitHub this coming week once I finish testing each social media integration.
And just to be clear...
This isn't about taking business away from an existing SaaS. I simply wanted to build something cheaper for myself that does the exact same thing.
If you want a ready-to-use solution and don't mind paying $40-$100/month, definitely check out the original SaaS!
But if you prefer self-hosting and saving money, Open Post is coming soon for free. π
Done and It works!!
β Creates a secured wifi access point to pair
β Exposes APIs to control
Freedom to connect whatever...
- Utilize the existing push button as the 'pairing' button
- Utilize the existing switch as a hard 'mute' button
- Utilize the existing micro USB port as 5V power
Finally, I can now pack everything inside the same case and actual use this now.
For $3, I am repurposing my dust-collecting Google Home Mini into a fully programmable, cloud-free Wi-Fi/Bluetooth speaker.
The existing case, buttons, power port will all work as it is.
Just need to replace the stock motherboard (buttom middle) with an ESP 32 (bottom right)
Cost breakdown:
- ESP32 = ~$2
- I2S mono amplifier (for speaker) = $0.99
Just waiting on the amplifier delivery, then I'll open-source the wiring diagram and code for anyone interested.
Hardware is fun!
Fable 5.2 is crazy.
While I wait for my amplifier chip to be delivered tomorrow....I just simulated the whole circuit in my browser.
- Simulated WiFi environment
- Simulated hardware (esp32, applifier, capacitors, wiring, etc)
- Simulated power & pairing with devices
It's crazy how fast you can simulate CUSTOM hardware circuits now before you physically connect everything and preform your final tests.
As an electrical engineer, this blows my mind.
I'm going to be physically soldering everything tomorrow and test the real hacked google home mini.
Stay tuned!!!
Open sourcing the $3 hack... for a custom/programmable wifi speaker
For $3, I am repurposing my dust-collecting Google Home Mini into a fully programmable, cloud-free Wi-Fi/Bluetooth speaker.
The existing case, buttons, power port will all work as it is.
Just need to replace the stock motherboard (buttom middle) with an ESP 32 (bottom right)
Cost breakdown:
- ESP32 = ~$2
- I2S mono amplifier (for speaker) = $0.99
Just waiting on the amplifier delivery, then I'll open-source the wiring diagram and code for anyone interested.
Hardware is fun!
Got another for $30 on Facebook marketplace shipped π€€ (pre-owned)
Inside it is a:
- Raspberry Pi 4 with 4 GB ram ($100+)
- 64 GB micro SD card ($35)
- Lorawan Module, antenna ($75+)
- Heatsink with fan ($15+)
- Power supply, strong metal case, integrated buttons, etc..
Go look for some locally in your area. People are throwing these away!!
I open sourced a repo with guide on how to repurpose these and use it as a quad core, 4 GB ram Linux server... without taking out the pi.
@JasonGiedymin Still rocking an a1 mini I got for $170 brand new from Bambu during one of their sales.
Though, I'm going to be upgrading for a bigger build area soon.
Still can't believe the $170 machine works flawlessly even after 2 years
Thank you for this crazy arbitrage tip.
Just grabbed a brand new one for $75 lol
Can't believe it has an 8GB Raspberry pi 4
Tear down revealed other goodies, like an SD card, Lorawan chipset, antennas and ofc the power supply π€£
Probably everything worth over $300+
Now I just need to brainstorm what i can use the pi for π€
The USB ports were not exposed so found a 3D printed backplate.
Printed it in 30 mins.
The USB ports are accessible now.
Maybe I'll run my trading bot locally on this.
Reverse engineering discontinued hardware is the new meta!
REVERSE ENGINEERED a ~$60 SenseCAP M1 Gateway
Now it runs as a 4-Core CPU, 8 GB RAM local server for $0.90/month of electricity....24/7
WHAT'S INSIDE THE DEVICE?
- Raspberry Pi 4B, 8 GB ram ($170+)
- Sandisk 64GB High Endurance Micro SD card ($35+)
- LoRaWAN Seeed Studio WM1302 Module ($30+)
- Amazing/Strong Metal Case with vents ($25+)
- 5V 3A power supply ($12+)
- Massive heatsink with fan; doesn't let temp go over 52Β°C even under stress in my tests ($15+)
- Rubber Duck Antenna ($5)
- Integrated Security / Crypto Element Microchip
- A programmable button on the case
Total goodies worth $300+ for ~$60.
Most people will just take out the raspberry pi and use it... π’
HOWEVER....
DON'T DO THAT.
You lose so much value.
The whole system works insanely well while keeping everything intact.
SO HERE'S WHAT YOU NEED TO DO INSTEAD π
1) Pick up a discontinued SenseCAP M1 gateway for cheap on Ebay, Facebook marketplace, etc.
I got mine for $62 (brand new, sealed)
2) Remove the SD card from the gateway, flash it with Raspberry Pi OS, put it back in and power on the device.
3) SSH into the device
4) The fan on the heatsink and the button on the back of the case won't work by default.
This is where I did some reverse engineering to get that working without you performing a tear down:
- The heatsink fan is connected to GPIO 13. You can use this info to enable the fan on boot, or at certain temps, manage fan speed, etc.
- The button on the case is connected to GPIO 27. You can use this info to program that button to do whatever you want.
Here's an .md file I wrote for your AI agents to assist: https://t.co/nH2qkQMj2W
You also have the LoRaWAN module installed if you ever want to run a private security system with 1-3 miles of range using sensors on the US 915/EU 868 MHz frequency.
Hardware is dead π
Shout out to @pmtiegs for sharing the idea of repurposing these kinds of devices.
LightPost is now OPEN-SOURCE! π
https://t.co/KMAdiucyzY
A self-hosted, lightweight social media posting tool with automated scheduling.
Light enough to run on my $10 Raspberry Pi Zero at home, costing me less than $1/month.
Tested Platforms:
- X/Twitter
- Instagram
- Facebook Pages
- Discord
- Telegram
- Mastodon
- Bluesky
Also added:
- Threads & LinkedIn (not yet tested)
- Pinterest, TikTok & Google Business (under development)
I've also added step-by-step guides with screenshots for all tested platforms under the "Setup Guides" page in the dashboard. Follow the guide and you'll have access to Meta apps in under 5 minutes (no waiting for "approval" required).
Go fork it, try it, build on it, sell it... just have fun with it! π€
Paying $99/month was getting a little too expensive...
So I built my own open source alternative that now costs me LESS THAN $1/month to run.
YES, 99x CHEAPER! π€―
Introducing Open Post, an open source alternative to Post Bridge that lets you post to all your social media accounts from one dashboard.
I'll be open sourcing it on GitHub this coming week once I finish testing each social media integration.
And just to be clear...
This isn't about taking business away from an existing SaaS. I simply wanted to build something cheaper for myself that does the exact same thing.
If you want a ready-to-use solution and don't mind paying $40-$100/month, definitely check out the original SaaS!
But if you prefer self-hosting and saving money, Open Post is coming soon for free. π
Just finishing up the community Discord server for access to my strategy for the open-source trading terminal for everyone who submitted the form.
I'll also be using the same place for support for my other open-source projects.
Please be patient while I finish getting everything set up before sending out the invite links to the submitted emails in a couple of days.
Finally..
The 150 people who submitted the form should be getting an email next week for early free access to the discord.
Once approved into the discord, you will receive the gated role giving you access to the trading terminal as well as early access to everything I build.
If you missed submitting the form, you just have to wait a little now. The terminal will be open sourced without the strategy very soon after.