Thea

she/they | transfem | sapphic 💜 | An analog value in a digital world.

[Thea @foundthefault]

@caraesten I agree, not sure what they mean by that. I would try contacting thier support to confirm.

[Thea @foundthefault]

@MLE_Online A variety of things that you absolutely, positivley don't need or have space for but will invariably take home anyway.

[Thea @foundthefault]

@VXO Its so hard to remove and most solvents won't touch it. We have some stuff that just has gaffer over the feet to seal it in because nobody wanted to deal with removing it.

[Thea @foundthefault]

@made_marian What could possibly go wrong?

[Thea @foundthefault]

@VXO Uhh who tuned for maximum smoke?

[Thea @foundthefault]

The number of threads in /r/sysadmin that reference goat farming can be used like The Waffle House Index but for the health of IT staffing.

[Thea @foundthefault]

@MLE_Online I think most of these are chip specific since they were fundamentally a grid of dots that could be on or off. The datasheet from the Signetics 2513 explains it pretty well and has a font chart. https://t.co/0xGO2xXQUz

[Thea @foundthefault]

@MLE_Online I'm confused, isn't catposting the reason the internet exists?

[Thea @foundthefault]

@draken_gray Free maintenance includes free warranty voiding.

[Thea @foundthefault]

@theavalkyrie As much as I despise Hakko's obscene pricing on consumables and the lack of a good stand, the FR-300 (now FR-301) is really the only good thing in the category unless you buy a big benchtop setup. The 1.6 and 1.0mm nozzles cover most uses.

[Thea @foundthefault]

My fog lights stopped working. Visual inspection of the fuse shows uhh...

[Thea @foundthefault]

@VXO They're both mostly all season road tires. If you want more off road capabilities try the Continental TerrainContact A/T.

[Thea @foundthefault]

I clamped it in the vise and put air to it at ~15psi so it would run slow. I used it to file off its own first two threads to create clearance. This fixed the problem.

[Thea @foundthefault]

I bought the worlds cheapest hazard frought die grinder. I don't even know how they can ship it here much less sell it for $14.

[Thea @foundthefault]

But now it was actually worse. Assembling it without the collet inside revealed the tolerances were off and the nut was bottoming out and chewing up the end threads before it got tight enough.