I think everyone agrees @Hersheys chocolate is now enshittified bullshit. Who is out there still making quality chocolate? @seescandies is on my short list of good chocolate, but there has to be more.
@Support@elonmusk I tried to download a video to save to my phone. Why the hell does it take a couple minutes to save a <60s clip? Itโs already played in full on my phone. The data is already here?? Make it make sense
So many great tv shows from the 80โs and 90โs have war flashbacks to Vietnam. Why are there so few shows now days that flashback to the sandbox, be it in the 90โ or 2000โs? Gov psyop or just lost writing talent?
@greggertruck I thought the quadrants were to isolate leakage for the downforce suction. If it was all one large area the smallest compromise of an edge skirt would kill all suction
Iโm so stoked about this demo! Yes it is incredibly impractical and probably insanely expensive. But that shit is cool and inspiring. Life doesnโt just have to be min maxing practicality at the cost of soul and inspiration. Roadster exists because it can, not because it needs to.
@Truthful_ast It was cool to see the thruster plumes throttle to first slow the fall and then bring it into a hover before touching back down on the ground
Iโm curious how long the proposed onboard compressor will take to recharge the tanks of roadster, and how much battery it will use. Will it need to re-pressurize at a supercharger or overnight at home? Maybe have a garden hose hookup to dump heat into some water?
@Grok assisted basic calculations say 600L at 250kg puts the tanks around 5,000psi. In a perfect world when gas doesnโt get hot when compressed and thereโs no efficiency losses, itโs about ~34kWh of energy stored in the tanks. It would take closer to 90kWh(this is a shot in the dark itโs too late to do math math). It needs active cooling to make sure the compressed gas isnโt too hot for the COPVโs, and of course compressor efficiency losses
Interesring to see how far back the test stand is pushed. I wonder what the control metric is. Equal panel weights? The CF look thicc vs steel and aluminum. I suspect thereโs some delamination in the cf panel, plus making a small sheet is not the same as a tank with bulkheads etc. Hope they use an autoclave and not just vac bags.