Doozy #twoozy
1/x
Now, I debated on just going straight in to the full deep-dive video showing all the nitty gritty details of how I am drilling the barrel, but two things got in the way. First, This is a completely rebuilt lathe with various unproven design changes...
@MarkWin1432 Same rails, same ryobi corded hammer drill, the same PGN bearings, the same drill bushings (shaft clamps), some of the same drill bits even.
I am glad someone finally said this. I have been waiting for this exact comment to appear. So I will address it WITH GUSTO.
Firstly, @MarkWin1432 , I am not trying to start a fight with you, I am not trying to insult you. I have no ill-will towards you, and I hope you read this post with an open mind and see why I am responding the way that I am.
>just use a gun drill
Why not use a gundrill can better be reframed as, "why not use a CNC lathe" or "why not use a normal manual lathe" or "why not buy pre-drilled barrel blanks" or "why not just buy a pre-existing barrel."
The sentiment is well intentioned and geared towards helping me. I appreciate that, but for someone like me I have to then discern if the person is saying this because they are 1: Genuinely wanting to be helpful and to save me from (quite literally) years of work, learning, failure, success, roadblock, soul crushing defeat, and transcendent triumph because they can perceive and infer future struggle through taking in information or 2: if they are an aphantasia-having mental sloth who regresses to the easiest thing in life, the kind of person who grabs a bag of potato chips for dinner instead of cooking a steak with rice and broccoli. @MarkWin1432 I hope you are the former and again, I am not trying to fight you are insult you.
In either case, both miss the mark on what is the purpose.
"But why, some say, drill a barrel with hand tools? Why choose this as your goal? And they may well ask why climb the highest mountain? Why, 35 years ago, did PA Luty make his submachine gun? Why did Jstark make the FGC-9?
I CHOOSE TO DRILL A GUN BARREL WITH HAND TOOLS. I CHOOSE TO DRILL IT WITH HAND TOOLS AND TEAR DOWN THE COMMANDING HEIGHTS AND LIFT UP THE CAPABILITIES OF THE DISENFRANCHISED, NOT BECAUSE IT IS EASY, BUT BECAUSE IT IS HARD."
The gun drill is the easy way out. It is what everyone does. It is what will destroy the soul of the man who seeks to exceed his peers and, with good morals and ethos, lift his fellow man to the new plateau, having suffered alone and solemnly to grant others an easier path on the trail that I have blazed.
It is one thing. It is a small thing. It is a difficult thing.
But it is MY thing. And it, God willing, will be just the beginning.
@hipercore You’d do a lot better with a gun drill, if you have the power to drive it. It would let you go straight through in one pass, and they drill straight enough you don’t have to go from both ends.
IT CAN BE DONE. NOBODY WILL STOP ME FROM MAKING MY HOME MADE G11 CLONE WITH CUSTOM AMMUNITION AND THE ENTIRE THING MADE WITH HAND TOOLS. EVERYONE WHO EVER DOUBTED ME WILL RUE THE DAY I COMPLETE IT.
https://t.co/GLszk6r5Pj
@ferryengineerwa@KelTecOfficial I have been told multiple times from completely separate people who have no overlap in social life tell me that I must be on cocaine. I have never done drugs, and never even been drunk.
Straight edge.
@whiskeyc1one Everything you see in those images was done with hand tools. No mill, no traditional lathe, not CNC, no Electrochemical machining, all of it done with 3D printed jigs.
@MarkWin1432 Here is my gun drill I bought over 3 years ago, in the mount I printed for my original Mark I lathe that I used to drill my 2nd barrel with.
@MarkWin1432 No, I didn't. I know that a gun drill drills in one pass and is straighter. That is not the goal. The goal is to make a barrel without one, for numerous reasons legal, economic, and technological.
@MarkWin1432 Yes, in an ideal world, a gun drill is the superior choice. However, I don't want to have to buy a specialty tool to make a specialty product. Think of it like the drones Iran is using to completely invalidate the entire military industrial complex of the United States.
the ONLY benefit a gun drill provides me is this:
1: It can drill faster since I don't have to employ peck-drilling
2: depending on the quality, a gun drill effectively reams the barrel at the same time, avoiding a separate process.
3: Longer lifespan and tool reusability due to the constant coolant being pumped in.
The geometry of the tip, the shaft, all that stuff, facilitates those functions. It is neither necessary, or prudent for what I am doing.
@MarkWin1432 Oh and uh, just FYI, I got you beat. 3 years ago I drilled a barrel with a gun drill on my original 3D printed lathe that was mounted to a 2x12, using the exact same rails I am still using.
You're still missing the point. I am fully aware of ALL the benefits of a gun drill.
Design criteria for my gun: I want to be able to make it anywhere with easily accessible tools that won't get me put on a watchlist. A gun drill is not rudimentary, easily accessible, and will probably put me on a watch list in certain countries if purchased as an individual or company that doesn't specialize in the machining of high aspect ratio holes. A gun drill is basically a one trick pony. If I buy a gun drill in britain you better believe the rozzers are going to come knocking.
My mark II lathe in contrast, was in a DIFFERENT uninsulated shop that was left in direct sunlight. Safe to say all my PLA printed parts went to hell immediately. Everything on my lathe is printed in PLA because PLA is awesome. Hekk anyone who says otherwise.
13/x
One more thing, hindsight about the heat:
When I drilled my first barrels (which coincidentally were a complete success exceeding all my expectations) I was drilling in the dead of winter in freezing weather in an uninsulated workshop. That meant tolerances were tighter...
Doozy #twoozy
1/x
Now, I debated on just going straight in to the full deep-dive video showing all the nitty gritty details of how I am drilling the barrel, but two things got in the way. First, This is a completely rebuilt lathe with various unproven design changes...