@Voultar@RetroRGB You’re doing it wrong. You need to install side jacks in the back of the trailer or you’ll bend the frame when you load him onto the ramp
@leonkiriliuk@goat_meister You might as well as it uses 10-15 amps over 120. If its already connected to a 20 or 30 amp. I might want to squeeze a little more usage from the circuit. As long as your total peak load is under 80% of the circuit.
@goat_meister@leonkiriliuk They usually have the cord tied to a wiring terminal so you can do exactly this. Its safer to install a duplex receptacle for future appliances so you can wire in a cord and slide it in
@Voultar Good luck. Im doing the same thing but for profit. My best advice would be to repurpose anything not rotted. Keep the existing funky layout and start by getting a couple roofing estimates so they can test your structure and you will know which areas to work on. Youtube it all!
@TheSmokeyFish Its a 3D printing project to make a Gameboy Kiosk using an LCD and the video out feature of Gameboy LCD replacement. Very niche way to feature a video out mod for the original Gameboy
@moment_mirthful @realDonaldTrump There is so much wrong with the Dems. This is not one of them though. You’re parroting misinformation and can do better than this