OnePointe Solutions

Helping scientists, create their ideal laboratory, one design at a time. Here is to the start of something great - The Laboratory Standard.

[OnePointe Solutions @OPSMFG]

Specifying semiconductor fab casework? Start with the station, not one universal material. Coordinate cleanliness, chemistry, ESD, airflow, utilities, and service access.

Read the guide: https://t.co/fMUNdlzvsR

[OnePointe Solutions @OPSMFG]

Anti-vibration lab tables 2026 guide is live.

Balances, mass spec, optical: three problems, three fixes. Passive vs. active isolation, granite vs. steel, and when the pump has to leave the bench.

https://t.co/QJwHhWUhOD

[OnePointe Solutions @OPSMFG]

Most lab-furniture specs ask what work will happen in the room. The bigger question is will the cleaning routine - chemistry, frequency, and exposure not damage furniture selected.
https://t.co/ePN312LP0q

[OnePointe Solutions @OPSMFG]

Most lab redesigns start with a manager realizing that the lab that once worked years ago can no longer support being done now.

5 signals · 4 causes · 3 tiers of response.

https://t.co/CpNM3JQgRZ

[OnePointe Solutions @OPSMFG]

If you didn't know .... SURPRISE! We manufacture our own line of fume hoods. It's only been a short while, but we have been able to support some cool projects thus far.

Check out a few past fume hood designs we've been able to fabricate.

#FumeHoods #LifeSciences #LabSafety

[OnePointe Solutions @OPSMFG]

If you're a lab manager or specifier have you ever been tasked with finding the right countertop that holds up bleach with cleaning? Well look no further than our comparison guide below: https://t.co/EgdQj46KtN

[OnePointe Solutions @OPSMFG]

Classroom cabinets fail differently than lab cabinets: door slams, backpacks, markers, spills. Our guide ranks what lasts 15 years: plywood cases, Grade 1 BHMA hinges (100k cycles), tough finishes.

https://t.co/I00xemYOSf

#LabDesign

[OnePointe Solutions @OPSMFG]

Personal care lab design centers on the emulsion bench: heated phase vessels, homogenizers, viscometers, and stability chambers, mapped to ISO 22716, ASTM D2196, and ICH Q1A(R2). https://t.co/HrEya2m0Qs #LabDesign

[OnePointe Solutions @OPSMFG]

Histology lab design runs on one dominant hazard: formaldehyde. Our new guide covers grossing, processing, microtomy, staining, and storage, mapped to OSHA, CAP, CLIA, and NFPA.
https://t.co/yeTjxo2SFf

#LabDesign #Histology

[OnePointe Solutions @OPSMFG]

ADA laboratory design lives by 4 rules: 28-34 in height, 30×48 clear floor, 27 in knee, 48 in reach.

Our latest lab design guide: what ADA means, Title II/III scope, and Texas TAS.

https://t.co/GMfFTVi0xN

[OnePointe Solutions @OPSMFG]

Environmental Testing Lab Design 2026.

Accreditation framework (TNI + NELAP + ISO 17025), SEFA 8 casework, ANSI Z9.5 hoods, ICP-MS clean room, chain-of-custody storage.
https://t.co/ZrGcVfotrD

[OnePointe Solutions @OPSMFG]

The best time to buy lab furniture is Q1. The far less than ideal is summer due to competing academic FY-start and federal Q4 collide on the same factory floors.

Rule of thumb: order in the previous quarter. Full guide:

https://t.co/hcO2z2DKt1

[OnePointe Solutions @OPSMFG]

Sometimes you think having a modular casework is the answer for your lab. But what does that actually mean?

Understand the difference between what's possible and what's reality with mobile and modular lab casework.

https://t.co/bClMNTZwUZ

[OnePointe Solutions @OPSMFG]

If you open a Division 12 lab casework section and skip to the manufacturer list, you have read it backwards.
Here's how to read a division 12 spec better - https://t.co/iKoikVMpOE

[OnePointe Solutions @OPSMFG]

Biosafety cabinet vs fume hood:

Fume hood = chemical (80-100 fpm, no HEPA).

BSC = biological (HEPA 99.97% @ 0.3µm). Class II A1/A2 recirculate, B1/B2 hard-ducted. 2026 guide w/ NSF/ANSI 49 + CDC BMBL:

https://t.co/Kn2NKSNGLQ

[OnePointe Solutions @OPSMFG]

VAV vs CAV fume hoods — every spec hits the same fork. ~$5,500/yr per CAV hood. VAV savings vanish when sashes stay open. New 2026 guide: ASHRAE 110, SEFA 1-2026, sash management, when CAV still wins.
https://t.co/Sntkmdx4ze

[OnePointe Solutions @OPSMFG]

Six fume hood types — bypass, low-flow, ductless, perchloric, radioisotope, walk-in — each with different SEFA 1 / Z9.5 requirements and a different mis-application that shows up in EH&S reports.

New OnePointe guide with selection matrix: https://t.co/3a5Prl67j6

[OnePointe Solutions @OPSMFG]

Lab casework: $150 to $1,200+ per linear foot. A 4.5x cost spread on 15 to 25% of your total lab budget. Our new guide covers painted steel, stainless 316, phenolic, and HPL with SEFA 8 specs, failure modes, and a decision matrix. https://t.co/hIBwvbjfNW

[OnePointe Solutions @OPSMFG]

Fume hood energy ROI:

Close the sash (free)

Decommission unused hoods (free + frees HVAC)

VAV retrofit (2–5 yr payback)

Low‑flow replacement (capex, stacked savings) Most labs skip #1–2 and then wonder why budgets are tight.

[OnePointe Solutions @OPSMFG]

Truly honored to have been featured in Elgin-Unplugged!

[City of Elgin @MyElginTX]

Come build your dreams in Elgin. We’re built on opportunities, where friends and neighbors lend a hand to help everyone succeed. We’re One Town One Team One Family. Enjoy the video and come explore with us at https://t.co/eYrUKcmIIC
Video by Elgin locals Benson Ellis & The Range