Seeed Studio

The #AI Hardware Partner

[Seeed Studio @seeedstudio]

#reBot B601-DM & B601-RS are now supported by @huggingface @LeRobotHF! 🤗

Build imitation learning workflows with Teleoperate → Record → Train → Deploy, using #LeRobot datasets and models for real-world #robotic tasks.🔗 https://t.co/81fbyWnih2

Check reBot GitHub repo for more hardware info: https://t.co/q97cYsNF1W

[LeRobot @LeRobotHF]

New robot added to LeRobot! 💪

Both DM and RS versions of the reBot B601 from @seeedstudio are now officially supported. The arm features a 2.5kg payload capacity and 6 degrees of freedom + gripper.

In the example below, the robot performs towel folding fully autonomously. The ACT model was trained on just 200 examples.

[Seeed Studio @seeedstudio]

🌪️ No towers. No Wi‑Fi. No signal. Just sand, wind, and relentless heat.🏜️

We put the SenseCAP Card Tracker T1000‑E through the ultimate desert test — buried in shifting sand, battered by fierce gusts, baking under high temperatures. The result? Mesh connectivity stayed rock‑solid, with zero performance degradation.

Built on the @TheMeshtastic open‑source mesh network with @SemtechCorp LoRa technology, the T1000‑E proves that even in the middle of nowhere, your connection doesn't have to break. When the grid disappears, that's exactly what off‑grid communication is for. 📡

Grab your own T1000-E：👇
https://t.co/TyN7Xug3uK

#SeeedStudio #Meshtastic #LoRa #HamRadio #OutdoorTech #EmergencyComms #IoT #OffGridCommunication #T1000E

[Seeed Studio @seeedstudio]

🤫 reTerminal RK3576 is On its Way......

An Edge AI touchscreen computer powered by the #Rockchip #RK3576, designed to bring intelligent computing to interactive applications.

👀 What to expect:
✅ #Android Support for flexible application development
☑️ Multiple Display Sizes: 13", 15", and 21" to fit different deployment needs
✅ Flexible Camera Options: Choose a version with or without a front-facing camera

From smart kiosks and industrial HMI to interactive AI terminals, reTerminal RK3576 is built to bring edge intelligence into everyday interfaces.

More details coming soon. Stay tuned

🛒 reComputer RK3576 Module is IN STOCK: https://t.co/O8jg7JShKc

#SeeedStudio #Rockchip #RK3576 #VisionAI #EdgeAI #AIoT #reComputerAILab #AIDeployment #TheEasierPowerfulAIComputer #Terminal #reTerminal #reTerminalRK #TheAIHardwarePartner

[Seeed Studio @seeedstudio]

😂 Need a little laugh at your desk?

Dad Jokes of the Day by utekim brings a fresh daily joke to your reTerminal E1001 or E1002, with 100 jokes spanning science, math, animals, history, and more.

Built with SenseCraft Seeedash, no code required!

Explore the design 👉 https://t.co/4cvZj8Xt5s

[Seeed Studio @seeedstudio]

⚠️What if we could spot an unstable cliff long before it fails? That's the challenge being tackled on England's south coast — with our hardware at the center of it.

📡Seeed Studio's SenseCAP S2120, an 8-in-1 LoRaWAN weather sensor, sits right beside the cliff, capturing rainfall, temperature, humidity and wind around the clock. 🌧️Paired with measurements of ground movement and soil moisture, the setup shifts cliff safety from check-up visits to 24/7 immersive monitoring.

Full story by Antratek Electronics & Media 👉
https://t.co/HxYerCUd3m

#SeeedStudio #IoT #LoRaWAN
#EnvironmentalMonitoring #ClimateChange
#Sustainability #SmartCities #SenseCAP

[Seeed Studio @seeedstudio]

A desk clock that also shows your live @YouTube subscribers and today's store orders ⏰

@techiesms built it on our new XIAO 1.47" IPS Display. Lay it down to sleep, stand it up to wake, thanks to the built-in IMU.

Watch the video 👉 https://t.co/i2hKJL8dcY

[Seeed Studio @seeedstudio]

10 demos later: robot training complete. 🤖
Yohana went from calibration to model generation with #SenseCraftRobotics at Fab O Shanghai.
Your turn to teach a robot: https://t.co/rWGPZpflPW
#SeeedStudio #EmbodiedAI

[Seeed Studio @seeedstudio]

🦾 reComputer Robotics J5011 with GMSL:
https://t.co/OacHXeIXuG

📖 M03 experiments, code & configurations:
https://t.co/WoIgZdyA2n

[Seeed Studio @seeedstudio]

From multi-camera perception to motion estimation! 🤖

Module 3 of our Mobile Robot Full-Stack Development in Practice course brings #LiDAR, #IMU, chassis feedback & #GNSS into the #ROS2 workflow on @NVIDIARobotics #JetsonAGXORIN-powered #reComputer Robotics J501.

Explore point-cloud processing, sensor alignment, TF & EKF state estimation — building the foundation for SLAM and navigation.

📖 Module 3 deep dive:
https://t.co/LFH1zfSI7W

⭐ Follow the open-source course & build along:
https://t.co/cmYH1wjrUP

[Seeed Studio @seeedstudio]

Your next camera project needs to recognize something specific to your application. How do you get your trained model onto the camera?
This walkthrough shows a custom YOLO11 model deployed on reCamera Pro, from model export to detections in Live Preview.
Which custom models do you need?
#reCameraPro #YOLO #theGotoAIcameraforYOLOattheedge #EdgeAI #Seeed #SeeedStudio #HowToBuildAnAICamera

[Seeed Studio @seeedstudio]

@DeenHarr Smaller spacing improves high-frequency beamforming but reduces low-frequency DoA accuracy. Based on our bench testing, 44 mm is the optimal spacing balance.

[Seeed Studio @seeedstudio]

#SpoilerAlert A Smaller reSpeaker...??👀👀

We’ve shrunk the mic spacing from 66 mm to 44 mm and added some buttons. But that’s not all… What other upgrades are coming?

If you’ve used our outstanding reSpeaker XVF3800, what features have you wished for in the next generation?
🧩 Better integration?
🌟 More control?
📌 A new way to interact with voice AI?

Drop your wishlist for reSpeaker 44mm in the comments! 👇👇

✅ Check the reSpeaker Voice AI Landing Page: https://t.co/li7D7pRmJo

#SeeedStudio #reSpeaker #MicrophoneArray #XMOS #VoiceAI #SoundAI #EdgeAI #VoiceInterface #SmartHome #HomeAssistant #ESPHome #XIAO #ESP32S3 #VoiceAssistant #VoiceControl #SmarterEarForAIVoiceAssistant #TheAIHardwarePartner

[Seeed Studio @seeedstudio]

🔥 Dual-arm collaboration in action!

What one arm can’t do alone, two can tackle together.

In this demo, we use #VR teleoperation and four camera views to control #reBot Arm B601-RS #dual-arm robot with precision and coordination.

Two tasks, working together:
✏️ Sorting pens and building blocks into a pen holder
🔌 Plug insertion & removal

📷 Main view + two wrist views + VR teleoperation view.

Two arms. Four camera views. Real-world manipulation.

🎥 Watch the full demo below.

👉Explore reBot Arm B601-RS: https://t.co/dGrDbBHT2D
👉 Get started with the B601-RS: https://t.co/XsIV1nJBQr

[Seeed Studio @seeedstudio]

@NicoChauvin74 the PCB diameter is 75mm, with case diameter goes to 80mm

[Seeed Studio @seeedstudio]

@dimka_rs Awww cute idea🤫The product manager will definately take it into considerations

[Seeed Studio @seeedstudio]

@justbhutani 😉5W speaker on its way~

[Seeed Studio @seeedstudio]

🕰️ Vintage engineering meets timeless style.

The Industrial Gentleman: Blueprint Clock by Frankfan brings a split-flap clock, intricate industrial blueprints, and a sharply dressed gentleman to your reTerminal E1002.

Built with SenseCraft Seeedash, no code required.

Explore the design 👉 https://t.co/J1uy6vkctx

[Seeed Studio @seeedstudio]

Your Sticky can now keep your to-do list 📝

Firmware v1.2.0 adds a To-Do List: say a task out loud on Sticky or type it in the Seeedash app. Plus auto rotation and four new languages.

See what's new 👉 https://t.co/WbddTMW2eK

[Seeed Studio @seeedstudio]

@NVIDIARobotics 📖 Yocto Build & Flash Wiki:
https://t.co/BByziqk8Pk
🛠️ Explore Seeed Jetson Carrier Boards:
https://t.co/eXAWW0Bq6b

[Seeed Studio @seeedstudio]

Your #Yocto image boots on #Jetson, but what if NVMe or USB still isn't working?

Using #reComputer Super J401 (@NVIDIARobotics Jetson Orin NX/Nano), we walk through matching the hardware config, building and flashing the image, and checking what actually works on the board.

A successful boot is a good start, not the finish line.

If you're customizing Linux for Jetson-based edge AI or robotics projects, these checks can save a lot of guesswork when something doesn't behave as expected.

Full walkthrough:
https://t.co/i75uBbBv0k

[Seeed Studio @seeedstudio]

@entretokens 2400mhz

[Seeed Studio @seeedstudio]

🚀🔥reComputer #RK3588 Module is Coming Soon!!!

⚡ Octa-core CPU: 4× Cortex-A76 + 4× Cortex-A55
🧠 6 TOPS NPU for on-device AI acceleration
💾 Up to 32GB RAM & 128GB eMMC
🔌 Rich I/O with a 260-pin SO-DIMM interface
🖥️ 8K video decoding at 60fps

From #CV to #LLM/#VLM workloads, get ready to explore new possibilities for industrial edge AI. 🤖

👀 Coming soon. Stay tuned!
🛒 reComputer RK3576 Module is IN STOCK: https://t.co/O8jg7JSPzK

#SeeedStudio #reComputerRK #Rockchip #reComputer #RK3588 #Module #VisionAI #EdgeAI #AIoT #ComputerVision #reComputerAILab #AIDeployment #TheEasierPowerfulAIComputer #TheAIHardwarePartner

[Seeed Studio @seeedstudio]

🚀 #ProjectSpotlight Using #OpenAI #Codex + #reComputer #RK3576 to build and deploy a #YOLOv8 video detection WebUI, working directly with the board over SSH.

What if you could go from an idea to a working Edge AI application with just a few prompts?

Here's what it can do:
✅ Upload an MP4 from your PC and run object detection on the Rockchip RK3576 NPU
☑️ View bounding boxes, class labels, confidence scores, and FPS
✅ Play and download the processed video directly from your browser

The results on real hardware:
⚡ 37.63 FPS NPU inference
🎯 7.89 FPS end-to-end video processing
📹 394/394 frames successfully processed and decoded

No OpenAI API needed for inference. #Codex helps build and deploy the application, while the #Rockchip RK3576 NPU handles on-device AI.
From inspecting the device environment to deploying and validating the complete workflow, see how AI-assisted development can accelerate Edge AI prototyping.

🔗 Explore the code, deployment guide, and test reports on reComputer AI Lab: https://t.co/qoEBis3PJC
🛒 reComputer RK3576/RK3588 is IN STOCK: https://t.co/H14jmfaq2C

#SeeedStudio #reComputerRK #Rockchip #reComputer #RK3576 #VisionAI #EdgeAI #AIoT #ComputerVision #reComputerAILab #AIDeployment #TheEasierPowerfulAIComputer #TheAIHardwarePartner