Switched On Automation

Smarthomes - Automation - Heating Controls - BMS - Control4 - Loxone - Rako - Lutron

[Switched On Automation @soautomation]

@thameswater @Ofwat surely it shouldn’t take more than 11 days for you to look at sewage running down the road, still flowing and stinks

[Switched On Automation @soautomation]

@nationaltrust You’ve seriously got to question why would you

[Switched On Automation @soautomation]

@SurreyCouncil @networkrail @balfourbeatty @TXMPlant Hi Sally, kt18 5pr about half way down before the railway access point on the left hand side, column number 11

[Switched On Automation @soautomation]

Good to see your banksmen have been doing a splendid job again @networkrail @balfourbeatty @TXMPlant, @SurreyCouncil might want a little word about that

[Switched On Automation @soautomation]

@ArtElectrics Your buying a style with b&o if you like it you buy it. But there’s plenty more options for more or less money depends what you want

[Switched On Automation @soautomation]

@sparkypete_ Mikrotik 4G are good the 5G stuff is still fairly lumpy I’m price the robustel one is pretty good. Starlink is the way to go though if they don’t mind the higher monthly cost. Just need clear view of sky and get the lan adapter so you can use other network equipment

[Switched On Automation @soautomation]

@Adrianepdavey It’ll be because it’s cycling on and off too frequently they just need to sit and tick to run efficiently

[Switched On Automation @soautomation]

@ludlowrat @ElectricalJuice AXA

[Switched On Automation @soautomation]

@nixonelectrical Loads of ways of doing it, better if you can wire the cameras as it will be more reliable, if you put sd cards in the cameras you negate the need for an nvr so would just need a Poe network switch and then you could use either a 4/5G router with sim card or get a Starlink

[Switched On Automation @soautomation]

@Adrianepdavey @ajhackwood Put big shiny signs on people’s houses and pretend to be an alarm company

[Switched On Automation @soautomation]

@Monty_Electrics Probably why they’ve said in BS7671 it’s advised to fit a rod on older TN installs. They know what’s coming

[Switched On Automation @soautomation]

@neilbridgeman Texecom premier elite 24/48 with a Smartcom on it, they integrate very well too

[Switched On Automation @soautomation]

@simprosoftware why is it if I edit materials cost on a quote because of price increase, it fails to give the correct materials cost value in summary. That should surely be a simple thing that should pull through no?

[Switched On Automation @soautomation]

@DefineTheLight It’s good and got some serious guts it’ll cut through anything, I did find it a bit on the heavy side and not as nimble as the carvex for coping

[Switched On Automation @soautomation]

@switchlec @Andrew33080654 @Nigelsmiff1979 9.5 times cheaper 🤣 you’d still be able to use ra2 it’s the ip version of the gjd that allows you to do better integration

[Switched On Automation @soautomation]

@HabitechLimited 510

[Switched On Automation @soautomation]

@CosyWarmPlumber Is the pump built in or am I going have to drag a compressor round with me?

[Switched On Automation @soautomation]

@BlenheimEpsom Nearly there chaps…been watching your progress…👍

[Switched On Automation @soautomation]

@AnslowElectric 11.7mm one on Amazon fits perfect on cat6