Printrbot Support

This is our support only Twitter channel, if you are not looking for support please follow us @printrbot

[Printrbot Support @support_pb]

@kf4kco Yes, we calibrate at the factory and then ask you to test print to verify. See unboxing at https://t.co/dILMexIAOj thanks!

[Printrbot Support @support_pb]

@ChromaticTheory hacking some kind of enclosure may help to slow the cooling of the filament ...reducing contraction / warping

[Printrbot Support @support_pb]

@mrceeky Hairspray helps to get a good stick. Also, up your bed temp, 80-100C :)

[Printrbot Support @support_pb]

@mrceeky No blue tape needed w a heated bed, but if you are going w/o heat we recommend the blue tape.

[Printrbot Support @support_pb]

@millerb32 @lewis_i @printrbot thanks for the tkt #'s. I see that your order is 2016. We're still happy to help troubleshoot bots that far out of warranty, but we invite you to do so on our forum. I apologize if you didn't see the auto-response from our tkt system! https://t.co/tF1VdyWdeU

[Printrbot Support @support_pb]

@RunningUtes give these suggestions a try https://t.co/i94ftNeiKV

[Printrbot Support @support_pb]

@danzca6 @ArtMods_ @printrbot @SpannerHands3D I think @ArtMods_ is referring to a hiccup in our store. PayPal related. Please open a tkt so that we can sort the details out. https://t.co/8ctlTmwFZS

[Printrbot Support @support_pb]

@Sean27030 Contact support through our web site with your ticket # so we can look into fixing it for you, thanks!

[Printrbot Support @support_pb]

@IolaniLSFabLab Orders 60+ days old (2014) are directed to our forum. You should have recv'd our the response w link. thanks! https://t.co/tF1VdyWdeU

[Printrbot Support @support_pb]

@geekdadof6 G2 will work w Play. See https://t.co/ZCnQzGbojx. Also, consider F6 USB B https://t.co/rEfXRaGPjz

[Printrbot Support @support_pb]

@Hairy_rebel Your order shipped yesterday and tracking info was sent via a UPS email. Happy printing!

[Printrbot Support @support_pb]

@timekillerjay Send a link to your forum post. Happy to help. Sorry if we missed you!

[Printrbot Support @support_pb]

@flyboy787 @printrbot Understandably so! We’ll find your tkt asap

[Printrbot Support @support_pb]

@flyboy787 @printrbot Support hours are Mon-Fri. If your order is 60+ days, users are directed to our forum.

[Printrbot Support @support_pb]

@angelawblack @printrbot Firmware flash guide: https://t.co/ILSiE1cHaz ...hope that is helpful!

[Printrbot Support @support_pb]

@angelawblack @printrbot Connection troubleshooting: https://t.co/i94ftNeiKV

[Printrbot Support @support_pb]

@MIKEMWA What is the tkt #? If the order is over 60 days old, you were likely directed to our forum - best way for us to help the most users :)

[Printrbot Support @support_pb]

@p_erickson30 use this link to generate postage to return your board. thanks! https://t.co/IOij72s7Ae

[Printrbot Support @support_pb]

@misteriverson So sorry for the unusual delay! Great things come to those who wait, and those kits should be on their way to you next week!

[Printrbot Support @support_pb]

@p_erickson30 Good news. Boards are back in stock! https://t.co/6UnQFMTX6u