@PhoenixLumen@lazygamereviews Pictured is an Intel D815EEA motherboard with normal power connections. Dell would use these boards and move the 20pin connector and also add a 6pin connector. You can see the unpopulated pins that OEMs would use. Dell had been doing this for years by that point.
@sondesix The HTC EVO 4G running v2.1 Eclair. Officially it only went to 2.3.5 Gingerbread, but mine has 4.4 KitKat on it thanks to the community over at XDA
@WysWyg_Protogen If you’re able to check, see if the wiring for the entire circuit is 14 gauge or 12 gauge. If it’s 12 gauge for all the wiring, then you *could* replace that 15A breaker with a 20A