Cittadhammo

[Cittadhammo @CittadhammoB]

@dhh @Modostech @FrameworkPuter Thanks @dhh, and thanks for creating Omarchy! Very nice combination for that project.

(By the way, I have sent you an email for a proposition if you are interested one day, but I know you must be a very busy person ;-)

All the best.

[Cittadhammo @CittadhammoB]

Finally finished the build of this Modos E-Ink Screen Framework 13 Laptop. All the info on the Thingiverse page for 3D printing the chassis, OS, Bill of Materials, references, etc. https://t.co/QJalkVWj0i

Thanks to @Modostech screen, @FrameworkPuter parts and @dhh free OS!

[Cittadhammo @CittadhammoB]

@jacobc_eth @andysmithai @Modostech @FrameworkPuter @dhh There are different screens, the flow is a different one especially the color one. The monochrome have more reflexivity and contrast(?). Join the discord to ask the specialist https://t.co/d9b0INsan0

[Cittadhammo @CittadhammoB]

@jacobc_eth @andysmithai @Modostech @FrameworkPuter @dhh Yes, of course. Maybe you cannot see in the video, but there is no difference with a normal screen for typing.

[Cittadhammo @CittadhammoB]

@Olli757 Thanks, Merci ! Holy with a "H", I believe, is the correct expression ;-)

[Cittadhammo @CittadhammoB]

@cafeyadayada @Modostech @FrameworkPuter @dhh Yes! Perfect combo! Just found that nice file explorer as well https://t.co/jT27pYuYih that works great for that e-ink screen.

[Cittadhammo @CittadhammoB]

@z_anyware @Modostech @FrameworkPuter @dhh This is a hard one as the display cable are usually going through the hinges in a regular laptop. Not impossible with a 3d printed chassis but challenging. Also, the modo display board for that particular board dev kit is "hard" mounted on the side, almost impossible to move.

[Cittadhammo @CittadhammoB]

@andysmithai @Modostech @FrameworkPuter @dhh There is a video in the post, it is 75Hz https://t.co/vi7ZgsmX9s

[Cittadhammo @CittadhammoB]

@cefegezor @Modostech @FrameworkPuter @dhh Rough calculation:
- machine with no screen = 5.2 W
- + Modos (1.4 W) = 6.6 W → 9.2 hours
- + LCD dim (1.8 W) = 7.0 W → 8.6 hours
- + LCD bright (4.3 W) = 9.5 W → 6.4 hours

A typical E-Ink screen would only be 0.3W, but without the controller (modos)

https://t.co/FodsjoB3nv

[Cittadhammo @CittadhammoB]

@efecihanzengin @Modostech @FrameworkPuter @dhh There is a blue-noise dithering algorithm for that.

[Cittadhammo @CittadhammoB]

@Modostech Now on https://t.co/QJalkVWQPQ if someone wants to 3d print it ;-)

[Cittadhammo @CittadhammoB]

@otrebu @Modostech @dhh on https://t.co/QJalkVWQPQ

[Cittadhammo @CittadhammoB]

@Olli757 @Modostech @dhh It should be the roughly same, the https://t.co/JsfcBU6NMU is 13.3 inch at a 4:3 ratio, the same as the dev kit 13.3 inch

[Cittadhammo @CittadhammoB]

@sebuzdugan @Modostech https://t.co/vi7ZgsmpjU check the github repo for more details.

[Cittadhammo @CittadhammoB]

@darkguy2008 @Modostech https://t.co/vi7ZgsmpjU

[Cittadhammo @CittadhammoB]

@jstamby @Modostech @dhh 699$... https://t.co/vi7ZgsmpjU

[Cittadhammo @CittadhammoB]

@Olli757 @Modostech @dhh You can check the modos discord channel for more pics, but this 13.3 inches screen 4:3 from https://t.co/vi7ZgsmpjU fits perfectly the framework 13 chassis

[Cittadhammo @CittadhammoB]

@Modostech Thanks, planing on posting the docs and 3d files when fully finished, still a prototype ;-)

[Cittadhammo @CittadhammoB]

@otrebu @Modostech @dhh When the prototype is more advanced, I am planning on sharing the files and the docs so that anyone can reproduce with a 3d printer.