AppttiTude_X

[AppttiTude_X @PeaceMoon_X]

@xfa273 こんにちは、扇風機を印刷するのにどんな素材を使っていますか？

[AppttiTude_X @PeaceMoon_X]

@Tokorotens23 8.5mm?

[AppttiTude_X @PeaceMoon_X]

@OPRobots Ánimo señores. Verán que el año que viene llegarán muchísimo mas fuertes.

[AppttiTude_X @PeaceMoon_X]

@Tokorotens23 Excellent. Greetings from Mexico!!

[AppttiTude_X @PeaceMoon_X]

@hidejr1053 心待ちにしております

[AppttiTude_X @PeaceMoon_X]

@25Isys ファン用の穴はどこですか？ :o

[AppttiTude_X @PeaceMoon_X]

@hidejr1053 おめでとう！

[AppttiTude_X @PeaceMoon_X]

@Ex_machina1203 I understand. I hope to see you next year

[AppttiTude_X @PeaceMoon_X]

@hayabusa8117 幸運を

[AppttiTude_X @PeaceMoon_X]

@25Isys それで十分でしょうか？

[AppttiTude_X @PeaceMoon_X]

@xfa273 こんにちは、とても興味深いですね。ところで、吸引シス���ムにはどんな素材を��っていますか？

[AppttiTude_X @PeaceMoon_X]

@25Isys PLA 3D print or an electrical insulating paint

[AppttiTude_X @PeaceMoon_X]

@hmsn_sts_mat_si Pls show us the bottom side

[AppttiTude_X @PeaceMoon_X]

@Tokorotens23 It looks great, You should try making a case with pla or something similar

[AppttiTude_X @PeaceMoon_X]

@hidejr1053 Hi, I usually make my PCBs with JLCPCB, and always use the standard diameter for the vias: 0.3 mm inner and 0.6 mm outer, but I've never dared to make it smaller because sometimes the holes are a little off-center.

[AppttiTude_X @PeaceMoon_X]

@MmYukikaze Very interesting

[AppttiTude_X @PeaceMoon_X]

@coredmotor Did it work? I use the same material, but with 0.2mm of tikness

[AppttiTude_X @PeaceMoon_X]

@efuenudii Cooper area

[AppttiTude_X @PeaceMoon_X]

@shimoharu_works Did it work?