RasP.iO

Raspberry Pi add-on boards and other fun electronics 😀

[RasP.iO @RasPiO1]

New crowdfunder RasPiO Breadboard Pi Bridge - connects all Pi ports to a breadboard neatly, robustly & in numerical order. Check it out now... https://t.co/QkdCdq6n2t

[RasP.iO @RasPiO1]

@ste5eu @embedded_iot @andysc @kickstarter @cleatsandcode It's the stupid things that trip people up, like not looking into shipping costs adequately or not 'flying three mistakes high' with your budget.

https://t.co/tQvKuAa9cJ

[Mimi the Bullterrier ( Neal types paws don’t work) @neal_oldmeadow]

After my #bullterrier Mimi got tangled with my @RasPiO1 nightlight I had to replace the broken @arduino nano. On testing no reading from the LDR. Realised there was damage to PCB too but all fixed by a bypass wire. We can see in the shed again!

[Alessio Minotti @alemino13]

@TheMagPi btw, beside a @Raspberry_Pi Zero there is the camera holder from @ThePiHut and the Analog zero HAT from @RasPiO1 which all performed flawlessly (under the sun too)

[RasP.iO @RasPiO1]

@Worlds6440 Can't see a problem with that

[RasP.iO @RasPiO1]

@Misel Still alive and kicking, thanks. :) Recovering from an operation, currently.

[RasP.iO @RasPiO1]

@mfraz74 @winkleink @ben_nuttall @RasPiTV Actually a rule starts with zero at the edge and a ruler doesn't, which is why they are rulers.

[RasP.iO @RasPiO1]

@recantha @ste5eu @thetuftii @Raspberry_Pi @Geeky_Tim It should be able to if your driver software can route the control pulses through either MOSI (GPIO10) or SCLK (GPIO11)

[RasP.iO @RasPiO1]

@ZodiusInfuser actually they are identical to the HAT specification apart from the cutout for the GPIO pins. https://t.co/hnyBj8XuJC

[RasP.iO @RasPiO1]

@FrankDelporte excellent! Thanks for sharing that Frank.

[RasP.iO @RasPiO1]

It is finished! RasPiO Breadboard Pi Bridge pre-orders are now ALL shipped. YAY! This is the last little lot.
If you missed out, no worries. We're now taking LIVE orders at... https://t.co/Ms9dxcL48v

[RasP.iO @RasPiO1]

@Joe_slow Thank you. Did you find the build OK?

[RasP.iO @RasPiO1]

@helenevirolan Excellent! How was the build?

[RasP.iO @RasPiO1]

@simon3270 Excellent! Was the video clear to follow?

[RasP.iO @RasPiO1]

The RasPiO Breadboard Pi Bridge 'specials' (International tracked and signed) packages shipped today, leaving just 8 which required further work (extra items to make or kit up). Those are now done and will go tomorrow. So we're very nearly done. Thanks everyone for support! 😀

[RasP.iO @RasPiO1]

@helenevirolan Excellent. Have fun with it. :)

[RasP.iO @RasPiO1]

@ptbw2000 YAY. Have fun :)

[RasP.iO @RasPiO1]

RasPiO Breadboard Pi Bridge pre-orders EU & Rest of World. ~90% shipped. (UK was yesterday ICYMI).
Should finish off the remainder tomorrow 😀
https://t.co/xPNLcm5GkC

[RasP.iO @RasPiO1]

@PeterOnion YAY. Enjoy. :)

[RasP.iO @RasPiO1]

RasPiO Breadboard Pi Bridge update! We've just shipped ALL of the UK pre-orders. Internationals to follow a little later this week. 😀
https://t.co/xPNLcm5GkC

[RasP.iO @RasPiO1]

@TalkTechDOTInfo should be tomorrow or Weds unless you get unlucky. I've found RM pretty good on the whole.