Long door schedule? Export it (File > Export > Reports > Schedule) and ask an AI to flag duplicate marks or blank fire ratings. Treat its list as leads and check each door in the model before you change anything. Revit template pack on Etsy: https://t.co/eE7lMOU4ul #Revit#BIM
@TheRoaringKitty 10 months of silence, then one picture of Mario in a cat suit, and a million people are decoding it. No caption, no chart. Honestly the best lesson in saying more with less I've seen all year.
@taylor_ Love this. Now I need a drafter version: top 10 AutoCAD commands of 2026. Mine opens with LAYISO, LAYWALK and OVERKILL, and the list only gets nerdier from there.
@engineers_feed Same lesson shows up in buildings. Every rectangular opening in a slab or shear wall gets diagonal corner bars on the drawings for exactly this reason, and when someone leaves them off, the cracks start right at the corners.
@engineers_feed What gets me is the 100 openings. Spreading the inflow across the whole chamber floor keeps the water from churning and shoving the ship around. Gravity plus good distribution beats a big pump.
Myth: a 2021 IECC lighting-controls cheat sheet works on any commercial permit set.
Reality: Florida's energy code leaves out the IECC's automatic receptacle control, and the 9th Edition starts Dec 31.
Where do your code notes come from: code book, template or last job?
Client redlines on a freelance job? Ask for one marked-up set per round, log every comment, and sort each: my error is free, new direction gets priced first. Then cloud it, QA it and reissue.
1-min walkthrough: https://t.co/dvctQiUqCc
Revision log: https://t.co/Um217jK6zf
@engineers_feed Buildings do the same thing on purpose. Long steel framing gets slotted holes and slide bearings at expansion joints so it can move. The tricky part on the drawings is making sure the ceiling, pipes and facade all have a joint at that same line too.
Hundreds of Revit warnings are hard to read in that little dialog. I export them (Manage > Review Warnings > Export) and have ChatGPT group them by type with counts. A few types are usually most of the list, so I fix those first, checking each one in the model myself. #Revit
@engineers_feed The part people miss is they grouted the gaps between those columns after the concrete cooled and shrank. Big mat foundations still get a smaller version of this: pour sequence, joint locations and a thermal control plan all end up on the drawings.
Messy layers in an inherited AutoCAD file don't scare me. Overridden dimensions do. The text says 12'-0", the line measures 11'-8", and the sheet looks fine right up until someone builds from it.
What's the worst thing you've found in a drawing you inherited?
Got a consultant's DWG for Revit? Use Link CAD, not Import CAD. A link reloads when the file changes and you can unload it in Manage Links. An import just sits in the model and adds weight. Etsy Revit pack, 20% off through Nov 18: https://t.co/eE7lMOU4ul #Revit#BIM
@engineers_feed The non-flammable part is what gets my attention. On commercial jobs a lithium battery room drags in rated walls, spacing, exhaust and a lot of back-and-forth with the fire marshal. A water-based cell that holds up like this could make those rooms way simpler to lay out.
Green Belt practice question: 60 jobs in WIP, 20 finished an hour. How long does a new job take to get through?
3 hours on average. Little's Law: lead time = WIP Γ· throughput. Shrink the pile before speeding up the work.
My Lean toolkit has templates: https://t.co/ea6F8ZFrnS
Revit question for anyone working on commercial projects: what's the worst model habit you've inherited?
My pick: detail lines traced over walls and doors so the plan "looks right." It prints fine until someone pulls a door schedule or cuts a section.
What's yours?
@quant49studio@bimwave_io Yep. A simple box with the specs in parameters covers most of it. I only swap in the detailed family when someone actually needs to see it.
Revit folks on commercial jobs: do you build your own families or use the manufacturer downloads?
I've opened light fixture families heavier than the whole floor plan. Now I build simple ones to our standards and keep the specs in parameters.
Which camp are you in? #Revit
Honest opinion: in most processes, the work isn't the slow part. The waiting is. A markup sitting in an inbox, a sign-off nobody owns, a handoff with no clear next step. Speed up the work and the date barely moves.
Where does work sit and wait the longest at your job?
Bringing in a consultant's background as an xref? Pick Overlay instead of Attach. Overlaid xrefs don't carry through when your drawing gets xref'd into someone else's, so no doubled backgrounds or circular references. Which one do you default to? #AutoCAD#CAD
Quiet freelance CAD niche: leasing plans for commercial property managers. Every time an office suite gets refit, their marketing floor plans go stale. Offer to update them after each move-out. Small jobs, but they come back.
Follow along for more of these.
#FreelanceCAD
@engineers_feed The building version of this: 304 handrails near the coast or an indoor pool will tea-stain within a year, which is why specs call out 316 there. And grinding carbon steel nearby leaves embedded dust that rusts, so everyone blames the stainless.