abdullah kahraman

electronics engineer

[abdullah kahraman @cebrax]

@CK0179CS @Safa_B_Yuksel @Safa_B_Yuksel öğrencisi olmak ayrıcalıktır 😎

[abdullah kahraman @cebrax]

@CapaciZ1006 😎😎😎

[abdullah kahraman @cebrax]

@Safa_B_Yuksel İp gibi dizilmiş mumlar yine hocamın rakamlarının altında 😎

[abdullah kahraman @cebrax]

@InForTheFun_ @fleshsimulator Second that 👏🏽

[abdullah kahraman @cebrax]

@argenindelisi Dolaylı yoldan, evet, bizim cihazları ilaç fabrikaları kullanıp tabletleri istedikleri yönde hareket ettirip nihayetinde paketine koyacaklar ve sonra senin önüne gelecek abi.. Sanırım atabay ilaç’ın kullanması lazım parol’de😅 Çok geçmiş olsun 💐

[abdullah kahraman @cebrax]

@QwertyEmbedded @enjoy_digital In some cases yes, according to Eric Bogatin. Here is a video from the legend: https://t.co/ABY2KnNMrW (starts after 40min mark)

[abdullah kahraman @cebrax]

@QwertyEmbedded @enjoy_digital I would like to fire the bullet: Do you need the ground plane on the top layer?

[abdullah kahraman @cebrax]

@LiKimmo @CursedFootprint We are using this footprint and to be honest we are very happy with it. Putting pins in this arrangement instead of putting all of them together helps a lot for reworks or hand soldering. It also helps minimize crosstalk if the product is potted, since the pins are separated more

[abdullah kahraman @cebrax]

@murtikano @argenindelisi Abi toplam footprint çok büyük geliyor bazen, geçemiyoruz.. Sadece 1 ürünümüzde geçebildik biz. Ayrıca gelişmiş peripheral yok maalesef, hepsi hayatta kalacak kadar serpiştirilmiş, PIO da kurtaramayabiliyor… Ama yine de çok seviyorum kendisini 😅

[abdullah kahraman @cebrax]

@GregDavill Why it doesn’t create a fillet with the pad on the body? Some chips do but some chips don’t, have you ever experienced such a thing?

[abdullah kahraman @cebrax]

@argenindelisi @okoman Abi maalesef.. Durumlar vahim..

[abdullah kahraman @cebrax]

@toybuilder @GregDavill There is no way I’m trusting a diode’s forward voltage when the current is not constant

[abdullah kahraman @cebrax]

@argenindelisi Abi ordan yürüyebiliriz madem tedarik mümkün.. bize bi işlemci lazımdı :)

[abdullah kahraman @cebrax]

@argenindelisi Abi onları bilmem ama FRAM tam benzin fiyatı tutmalık, sınırsız yaz bozu var

[abdullah kahraman @cebrax]

@fkadev @celebiogullari Koçak’a kıyaslarsan kim alır?

[abdullah kahraman @cebrax]

@arturo182 @Raspberry_Pi Looks good! Why some of the pins of that QFN are not covered with solder and some are fully covered? Happens to me, too.. Anybody know why?

[abdullah kahraman @cebrax]

@nixie_guy Try to make both of the inner layers GND and whenever you have a layer change (ie: a via), support it by putting a GND via nearby

[abdullah kahraman @cebrax]

@emh203 @saleae Oh yeah I can get a grasp of that now :) thank you and well done