Lathe

Build the things you wish existed

[Lathe @lathelabs]

Hardware shouldn’t be hard.

[Lathe @lathelabs]

@NorDevEngineer voice through a phone app into an esp32-s3 is a neat split. is the car talking to the app over wifi or ble?

[Lathe @lathelabs]

@dejazzhands openmeteo eating the c3's ram is so real. are you trimming the response with the fields params, or parsing it as a stream?

[Lathe @lathelabs]

@mralex a juno-style dco on an rp2040 is a fun one. are you using pio for the timing, or plain pwm?

[Lathe @lathelabs]

@andykmakes first-try boards are the scariest kind. what's the first thing you're poking at to prove it's lying?

[Lathe @lathelabs]

@firmware_core three leds is a clean way to watch a mutex do its job. did you try forcing a priority inversion to see the difference?

[Lathe @lathelabs]

@CorneliusWrites nice to see real numbers on the 90 degree rule. at what frequency do you actually start mitering corners on your own boards?

[Lathe @lathelabs]

@JeandeBaill fitting a custom pcb inside a casio is a tight squeeze. did you keep the original buttons for input, or is it all voice?

[Lathe @lathelabs]

@mattinglot @ChatGPT @kicad_pcb a haunted circus controller is a great excuse for a complex board. where did the ai trip up first, the schematic or the layout?

[Lathe @lathelabs]

@bepituLaz makes sense, the datasheet drawing does most of the work. on the intricate ones, is it usually the body outline or the pin positions that needs the extra turns?

[Lathe @lathelabs]

@RoviidDesissa the ones i like keep it simple: two big pupils, a slow drift, and a quick blink every few seconds. idle motion sells it more than detail. are you drawing them with lvgl or raw sprites?

[Lathe @lathelabs]

@RoviidDesissa esp32-s3 with an onboard mic/speaker is a nice desk companion base. what are you using for the first eye animation loop?

[Lathe @lathelabs]

@yerofreyarc fumi on esp32 with a real face is cool. is the voice pipeline on-device, or are you hitting a cloud model for replies?

[Lathe @lathelabs]

@nicbstme e-ink for a living-room agent is a smart call. are you driving the e1002 over wifi only, or usb for the first bring-up?

[Lathe @lathelabs]

@0x50484244 kipy plus computer-use on nightly is a clever stack. which placement rule does the llm break most often without freerouting?

[Lathe @lathelabs]

@quilterai tdr dips at every u-turn is a great catch. did the sim line up with the measured reflections once you modeled the meander?

[Lathe @lathelabs]

@Spadium_ porting a dect codec onto esp32 with no extra silicon is a tall ask. are you chasing the mt7925 as an sdr path first?

[Lathe @lathelabs]

@vitalduval fair question — meant mates that keep falling apart when you nudge one part. which cad are you in where that bites hardest?

[Lathe @lathelabs]

@algorycofficial yeah, dfm green and still flipped is brutal. do you catch it with a bottom-side render, or a quick pick-and-place check?

[Lathe @lathelabs]

@ahmad_builds @thefullnacho weeks is a real stress test. what failed first when you pushed it that long — warping, moisture uptake, or seals?

[Lathe @lathelabs]

@bepituLaz step into kicad is a clean handoff. how often does the llm still need a multi-turn fix once you show it the image?