simleek

AI + Occasional Functional 3D printing + Wrong Opinions + misc

[simleek @simulatorleek]

@LinusMixson RLHF but the Humans giving Feedback are sometimes women that like smut novels and treat the LLM as their boyfriend, and then the LLM generalizes.
That's my guess at least.

[simleek @simulatorleek]

@daviderady I wondered about making a pancake stack motor of these, using water as the dielectric, and having it be sub-1v, but I think that starts requiring photolithography or PVD.

[simleek @simulatorleek]

@Plinz Mathematics>Physics.
"Cogito, ergo sum" is 100% correct.
Every observation in the observable universe can never reach that.
This, too, can be a part of panpsychism outside or instead of physics, and beliefs do change behaviors. It's just not science or engineering.

[simleek @simulatorleek]

@_Stocko_ That is humanoids specifically.

[simleek @simulatorleek]

@_Stocko_ Yeah, the retracting plug used with vacuum cleaners could be pulled out of the head like a pony tail, or it could be more like an actual tail, and it either wouldn't harm motion or could help with motion.

[simleek @simulatorleek]

@Anthrobotics Will do! I joined the Discord.

[simleek @simulatorleek]

@IanPritchard Yep! Working on the generator for different tendon strengths and speeds for this currently.

[simleek @simulatorleek]

Turns out a linear package was necessary to fit everything in the design.
Also, I couldn't find a crown gear generator in OnShape, so I made one.

[Anthrobotics @Anthrobotics]

https://t.co/JraqP0mE7F

[simleek @simulatorleek]

@_Stocko_ Mini pick-and-place machine?

[simleek @simulatorleek]

Slight improvement

[simleek @simulatorleek]

I am now doing CAD in JavaScript.

[simleek @simulatorleek]

@cancelik Induction heads emerge during pre-training and can later be checked if active during RLHF to determine if input is 'boring' or repetitive.
Definitely seems learned rather than programmed or something intentionally put in by Anthropic.

[simleek @simulatorleek]

@amit_ika I mean, you're right about the stresses, though the crown gear has some other benefits.
You can find a bevel gear generator in onshape by searching "Bevel gear- Kopieren" and adding the V2 document.

[simleek @simulatorleek]

@amit_ika There is a bevel gear generator in Onshape already. There was not a crown gear generator, so I made it. Now you can do both.

[simleek @simulatorleek]

@amit_ika It creates a spur gear that acts as the pinion that meshes with the crown gear.

[simleek @simulatorleek]

3D printable 16x reduction + 3.2 diameter pulley for 030 DC motor. requires 8 M1x6 screws, 4 m2x25 screws, and 1 m3x5 screw.
Design complete. 3D printing and testing required.

[simleek @simulatorleek]

Initial robot head work.

[simleek @simulatorleek]

@blind_via Sounds fun!