MA

@[email protected]

[Garrett Searight @GarrettSearight]

Here are what the final moments of WCBS 880 sounded like as @ESPNNewYork takes over the signal:

[MA @13MA1]

@KWF Is that non-blocking? Max MTU? Can't find either on the spec page.

[MA @13MA1]

@AndrewWiskow Bitcoin node?

[Brian Roemmele @BrianRoemmele]

@chief_merritt Daniel, thanks for asking. It is a BBS running on an Commodore 64 with a Bitcoin node connecting by way of a Raspberry Pi. The entire Internet can go down and this will continue to run.

[MA @13MA1]

@trumanboyes

[MA @13MA1]

@EmilyKager Tail ends of the distribution carry the same z score

[MA @13MA1]

@harrymccracken Here's my guess: User owns all content associated with their identity, identity is additive and/or portable between social networks at user's discretion.

[MA @13MA1]

@kabuelenain NetEm

[MA @13MA1]

@gregnacu This is a really useful and fast network card. I prefer it to the userport version. Also works well on the C128.

[MA @13MA1]

@gregnacu This is a helpful and fascinating resource, thank you for creating and maintaining it.

[MA @13MA1]

@shefys Is that Ethernet over GPON or some other wide area transport?

[MA @13MA1]

@trumanboyes notepad.exe

[MA @13MA1]

@aka_pugs @bcantrill

[MA @13MA1]

August 30, 2011

[MA @13MA1]

Lower Manhattan, almost sunset. http://t.co/VcTp9dE

[MA @13MA1]

@particlesbbs https://t.co/TAeJGfctFl

[MA @13MA1]

#FujiNet

[MA @13MA1]

@sutehk there is a modern RRNet compatible c64 build here that you can use with a 64 to validate the card.
https://t.co/TXfN0BB89s

[MA @13MA1]

@sutehk Do you have another machine (can be a 64) to test the card? You can use Kipperterm2 or some IP65 variant built for the 64 to test.

[MA @13MA1]

@sutehk It's definitely supported. There are some issues with noise that can be corrected with an IC buffer, but I don't think that's the issue here.

[MA @13MA1]

@sutehk Probably an issue with the card or the connection between card and C128D. Error codes below for quick reference.

[MA @13MA1]

@sutehk Strange. I looked at the manual, all switches up is the correct configuration on the 64NIC+

If you unplug the NIC and load Kipperterm do you get the same error message?