Aljaz Titoric

I am an Electronics Engineer and a designer of cool products and maker of tasteful photos.

[Sean Hodgins @idlehandsdev]

The TENEX Giveaway is happening! Enter here: https://t.co/DTJowHYHtE

[Aljaz Titoric @AljazTitoric]

Let’s see how this new heatsink on top of the #raspberrypi #cm4 performs. Assembly was super easy and all necessary screws & spacers came in the box.

[microbots @microbots_io]

The new tiny 12-layer pcb is just 2cm wide!

[Aljaz Titoric @AljazTitoric]

Numero UNO is here

[Arduino @arduino]

The Arduino UNO is back! 😮 Introducing the UNO Mini Limited Edition...
https://t.co/trLNYPOcV4

[Aljaz Titoric @AljazTitoric]

@dylanmrose @Raspberry_Pi @altium @envox @omnifixo Boards were produced and assembled in Europe, Slovenia.

[Aljaz Titoric @AljazTitoric]

Testing #raspberrypi #cm4 by @Raspberry_Pi mounted on a carrier PCB with 7” touch display. IO carrier board provides large number of output relays, protected digital inputs, RGB LED strip and a bunch of standard communication ports. It’s a 6-lay board, designed in @altium

[Radiona_org - Zagreb Makerspace @RadionaOrg]

Woohoo!!! #ULX4M-LS v0.0.2 funded by @NLnetFDN is assembled! @latticesemi ECP5UM #FPGA CM4-IO compatible

[Aljaz Titoric @AljazTitoric]

@FlukeCorp Hey Fluke, thank you for recommending me the repair service.

[Aljaz Titoric @AljazTitoric]

This is how I would describe a happy place for hardware people…

[Aljaz Titoric @AljazTitoric]

@LesTurvey @InspectarTeam @altium @uniorbiketools @envox @HakkoEurope @KullikTbk @Keysight @bkprecision @3Dconnexion @FlukeCorp Wooow this is really cool! 🤤

[Aljaz Titoric @AljazTitoric]

@r_yuniesky @InspectarTeam @altium @uniorbiketools @envox @HakkoEurope @KullikTbk @Keysight @bkprecision @3Dconnexion @FlukeCorp Thanks, it’s Lenovo W541

[Aljaz Titoric @AljazTitoric]

@IslandRobotics @MakeAugusta Disgusting 🤮

[Aljaz Titoric @AljazTitoric]

@lukego @InspectarTeam @altium @uniorbiketools @envox @HakkoEurope @KullikTbk @Keysight @bkprecision @3Dconnexion @FlukeCorp You have a really good eyes, It’s a microscope, yes. :)

[Aljaz Titoric @AljazTitoric]

@panpupez @InspectarTeam @altium @uniorbiketools @envox @HakkoEurope @KullikTbk @Keysight @bkprecision @3Dconnexion @FlukeCorp Are you running a repair service? Can you repair broken reflow oven, variac…? Those are heavy duty boxes with properly bent and broken parts. I have more stuff broken than I shown on photos. Maybe some of them could be fixed.

[Aljaz Titoric @AljazTitoric]

@Imagibearding @InspectarTeam @altium @uniorbiketools @envox @HakkoEurope @KullikTbk @Keysight @bkprecision @3Dconnexion @FlukeCorp It’s Hakko FM-206 3-ch station.

[Aljaz Titoric @AljazTitoric]

For the last few months I have been familiarizing myself with my new ultimate #hakko soldering/desoldering setup.

Which soldering equipment do you use?
#solderingiron #soldering

[Aljaz Titoric @AljazTitoric]

@panpupez @InspectarTeam @altium @uniorbiketools @envox @HakkoEurope @KullikTbk @Keysight @bkprecision @3Dconnexion @FlukeCorp Yeah, I agree. I had it more, much more. But courier destroyed most of it during its move across the Europe. I talked about this here https://t.co/SdeLSIUX2x

[Aljaz Titoric @AljazTitoric]

@arda_bildik @InspectarTeam @altium @uniorbiketools @envox @HakkoEurope @KullikTbk @Keysight @bkprecision @3Dconnexion @FlukeCorp Yes please :)

[Aljaz Titoric @AljazTitoric]

@gojimmypi Nah, it’s not so hard to clean it after the use. If the lab is messy, it’s most likely due to the lack of storage boxes. :D

[Aljaz Titoric @AljazTitoric]

@landberg @InspectarTeam @altium @uniorbiketools @envox @HakkoEurope @KullikTbk @Keysight @bkprecision @3Dconnexion @FlukeCorp Yes indeed! :D

[Aljaz Titoric @AljazTitoric]

@therobotbuilder It’s a Logitech Craft keyboard (really cool but too expensive). Jump over to my Instagram page, I posted a few photos of my studio there - https://t.co/iqvP5tOYeP

[Aljaz Titoric @AljazTitoric]

7” RPi DSI Display requires the correct driver to work with RPi CM4 - vc4-fkms-v3d-pi4. It took me hours to figure this out…😤 #raspberrypi #cm4