I built a smart desktop gadget using a 2.7" e-paper display from @lilygo9. This device shows time, weather updates, weather forecast, and a to-do list to help track daily tasks without distracting from work.
https://t.co/6qZlAQJ5hN
@Hacksterio@xdadevelopers@tinkercad@hackaday
Deskbuddy
Unlike many other pet bots, this one features a vibrant color display that brings its emotions to life. It uses @seeedstudio xiao esp32s3, it syncs over WiFi to show realtime weather forecasts, current time and emotions.
https://t.co/JSHulOhB0z
@Hacksterio@hackaday
I made a desktop pet robot (not Desai mochi). It can show cute emotions, time and weather forecast. also open sourced it. Designed using @tinkercad and printed using @BambulabGlobal A1.
https://t.co/Q9i8gtnhS8
@Hacksterio@hackaday@cnxsoft
This is AIBOX-OrinNano, which is equipped with NVIDIA's Jetson Orin Nano module , providing up to 67 TOPS of computing power. It can run AI models and more complex deep neural networks easily.
https://t.co/CfLauoLQt2
#jetson#orinnano
I made a @arduino Nano R4 based LED hourglass. I used @tinkercad to design the enclosure and printed it with my @BambulabGlobal A1. I released this as open source and you can download all the files.
https://t.co/BAsomTo5Ni
In this video, @e_s_corner goes hands-on with the new Arduino Nano R4. Watch as he takes a closer look at the board's features and how to get started: https://t.co/f0XYqTTuIH
I Built a 5×5×5 RGB LED Cube with Neopixels and Custom PCBs! instead of the traditional hand-soldering method, I used custom-designed @JLCPCB PCBs for each layer. This reduced the assembly time also gave the cube greater structural strength.
https://t.co/RJjHJJUOgl
This is the best esp32 camera module So far. Yes this @dfrobotcn esp32 s3 AI camera module has some unique features like night vision, 160° wide angle 3MP camera , onboard I2S microphone and amplifier, chatgpt integration, ambient light senor etc.
https://t.co/byrkzNpjAh
@PurplNutsak@MicrochipMakes Well, i made some mistakes in the soldering part. While shooting and soldering made some problems. Btw it supports up to 280°C
I made a Transparent Arduino UNO board. We can really see through the PCB. I designed it using @easyeda and fabricated it from @JLCPCB .
https://t.co/nyH0mqEKsT
Hey, I made a custom transparent flexible PCB. Yes this is the future of PCBs. I designed the PCBs using @easyeda and fabricated from @JLCPCB#pcb#electronics#Tech
https://t.co/0ZeqdE7Xsg
I made an esp32 based cheap PCB drone. We can control this drone using our smartphones. Anyone can build this below 15$
PCBs from @JLCPCB@dfrobotcn
https://t.co/cibvvJQ8vX