CopperPilot

// accelerating hardware design with AI
Bangalore, IN / Houston, TX

[CopperPilot @copperpilot_ai]

Input: Text
Output: Full PCB in minutes
Check us out -> https://t.co/UdjBszBYTO

#ai #electronics #embeddedsystems #robotics

[CopperPilot @copperpilot_ai]

We used CopperPilot to make this cool DIY gravity simulator -> https://t.co/UdjBszBYTO

[CopperPilot @copperpilot_ai]

@RuntimeBRT Truly amazing stuff we're getting to see out of India now. Excited to see where this goes. Great work covering this as always, Caleb!

[CopperPilot @copperpilot_ai]

The least glamorous part of PCB design is also the most expensive one: verifying symbol/pinout/footprint actually match the datasheet.
Miss it and you don't find out until the board comes back from fab.
We built CopperPilot to catch it first. Check it out: https://t.co/UdjBszBYTO

[CopperPilot @copperpilot_ai]

Meet #SteadyScoop — a spoon that stabilizes itself for people with tremors.
Firmware, electronics, the whole build — all in-house. Next up: custom PCB design. 🚀

#electronicsdesign #pcbdesign #copperpilot

[CopperPilot @copperpilot_ai]

@shivam_kajale @astrm_labs Integrated LoRa RX on a 30.5×30.5 mount with no add-on receiver is the kind of constraint most teams punt on. Clean bring-up. Good luck on the flight test.

[CopperPilot @copperpilot_ai]

@vaizaragorn Tiny boards like this are where component placement actually gets hard — every mm matters once you're skipping onboard power reg to save space. Nice piece of design.

[CopperPilot @copperpilot_ai]

@ga0_lab Welcome, Ethan. Face shields during COVID, then modding an Ender 3 down to the hotend — that's exactly the kind of self-taught build trajectory this community runs on. Following along!

[CopperPilot @copperpilot_ai]

New module season again. The annoying part is never the schematic — it's tracking down a verified footprint/symbol for something this new before routing can even start. That gap is basically CopperPilot's whole reason to exist!

[CNX Software @cnxsoft]

.@NXP RW612 dual-band WiFi 6, BLE 5.4, and 802.15.4 IoT module with optional PSRAM.
https://t.co/t0mdYYihbO

@Quectel_IoT FCM365X comes with 8MB flash and operates in the -40 °C to +85 °C temperature range for demanding Smart Home and industrial IoT (IIoT) applications. The module exposes GPIO, SDIO, UART, USB, JTAG, I2C, I2S, ADC, LCD, and PWM interfaces through its LCC+LGA package.

The company provides the QuecOpen SDK to let customers develop their own firmware running on the Cortex-M33 core of the RW612 SoC. Two development boards are also available, but details are sparse about those.

[CopperPilot @copperpilot_ai]

@EnercompDrones Indigenous flight controllers built and shipped at this spec is exactly the kind of hardware India needs more of. STM32H743 + PX4 support is a solid stack. 🇮🇳

[CopperPilot @copperpilot_ai]

@FossPrime @Dexerto @HardwareSteam @valvesoftware this may just be the coolest thing we've seen all week 😎

[CopperPilot @copperpilot_ai]

CopperPilot was selected from over 10,000+ applications for the final round of #VibeCon #Bengaluru by @emergentlabs , and @ycombinator and @lightspeedvp , @LightspeedIndia !

Excited to meet some incredibly sharp minds! Let’s connect on April 16th & 17th.

[CopperPilot @copperpilot_ai]

Happy to say that @copperpilot_ai has been selected for the @emergentlabs #VibeCon Round 2! The next Nvidia will be built with AI. Use CopperPilot to:

Build the Chip: https://t.co/UEvur2cY4t
Build the PCB: https://t.co/FqLqfpARyg
Write the Firmware: https://t.co/h2VxpfYq8C

[CopperPilot @copperpilot_ai]

@copperpilot_ai won the @Accel + @AnthropicAI Dev Day! We are building in the AI for Hardware space. We will be attending the upcoming Anthropic Builder Summit, see you there!

@aditya_ng_5

[CopperPilot @copperpilot_ai]

"Draw me USB-C power delivery at 9V/2A"

30 seconds later, I had:
- STUSB PD controller
- 5.1kΩ CC resistors 1% tolerance
- VREG 1V2 and 2V7 bypass caps

Try it: https://t.co/UdjBszBYTO (early access)

#electronics #hardware #pcb #engineering #embedded

[CopperPilot @copperpilot_ai]

@RuntimeBRT @air_skye @arrive_ai @Ottonomy_IO @aditya_ng_5 @temple Thanks Caleb 🚀 for those interested in accelerating their hardware design with CopperPilot, we're running an Early Access Program, sign up on our website!