mcu.cz

was founded in 2001 and we are one of the oldest servers dealing with microelectronics in the Czech and Slovak Republics.

[Seeed Studio @seeedstudio]

👀 Wanna see Sticky on your fridge?

It's an e‑paper note screen you add with your voice. Runs weather, clock, photos & more.

📺Check the preview 👇

[CNX Software @cnxsoft]

The world's smallest Arduino-compatible USB-C board.
https://t.co/I7CAAERRur

The moddo Pinch measures just 10.9 x 10.5 mm, and features a Microchip Technology Inc. SAMD11 Cortex-M0+ microcontroller with 4 KB SRAM and 16KB flash, an RGB LED, reset/bootloader button, 3.3 V LDO, and a total of 12 GPIOs via a 16-pin header.

The company provides a kit with a breakout board and a board URL to easily get started in the Arduino IDE.

[mcu.cz @mcu_cz]

@Rootcz Porad plati: content is king 👍

[SourceRobotics @SourceRobotics]

We just shipped https://t.co/XWM9wXEcXf v0.0.1 — the first release of our desktop tool for working with our stepper and BLDC motor drivers.
What it can do today:

- Flash application firmware over CAN or UART
- Configure drivers over CAN or UART
- Plot position, speed, and torque/current in real time
- Run calibration and apply presets

[Cyber City Circuits @MakeAugusta]

dang

[SOLIDWORKS @SOLIDWORKS]

🚨 50% Off - Summer Promo! 🚨 Get SOLIDWORKS for Makers for just $24/year for a limited time! 🎉 Whether you're designing bike repairs, enhancing your backyard, or creating stunning 3D prints, you'll be equipped with professional-grade CAD tools. 🛠️ Don't forget to use code SUMMERMAKERS50 at checkout! #SOLIDWORKSforMakers.
Click the link to buy now: https://t.co/07zJo1dac3

[Tom Dörr @tom_doerr]

Reveals reverse engineered Raspberry Pi Compute Module 5 schematics

https://t.co/GymtFZYLPF

[Ronald van Loon @Ronald_vanLoon]

#Digital Microfluidics:The Science of Controlling Droplets with Electricity
by @MindfulL205

#EmergingTech #Technology #Innovation #Tech

[Interesting Engineering @IntEngineering]

Texas Instruments has released a microcontroller measuring just 1.38 mm² — small enough to sit comfortably on a fingertip — at a unit price of around 20 cents. The chip is designed for ultra-low-power applications including medical wearables, hearables, and compact IoT devices, where both size and cost are critical constraints. At this scale, integrating processing capability into disposable or implantable medical devices becomes economically viable for the first time. TI positions the design as one of the smallest MCUs available in mass production today.

#TinyTech #Microcontroller #Innovation #EmbeddedWorld #TI #Wearables

[mcu.cz @mcu_cz]

@tkapler Pokial by sme isli do detailov tak to co akoze vlastnu antropic, opeai a dalsi je vsetkych, je to stiqhnute z verejnych zdrojov a casto aj neverejnych a doslova sprivatizovane. Takze zlodej krici chitte zlodeja? Alebo cinan kradnut nemoze? 🤫

[mcu.cz @mcu_cz]

@Lord_of_war_95 Russia 2.0 jako open source ... aneb diy russia army 🤭

[mcu.cz @mcu_cz]

@nezvany_host 8 bit = 1 Byte 😂

[mcu.cz @mcu_cz]

@BambulabGlobal On iPad: still no rotation supported 😂

[mcu.cz @mcu_cz]

@NemecekPanda38 Jenom vekem to asi nebude. Ty vecicky jsom porad menci a menci 🤭

[Miroslav Nemecek @NemecekPanda38]

Poslední 4 moduly stavebnice #BarePi, a teď už fakt končím s hardwarem a jdu konečně testovat, programovat a dokumentovat.

[mcu.cz @mcu_cz]

@chiptronCZ V cine je vsechno spolecne, komunizmus 🤭 uz brzy take v eu 🤭vcetne povinne registrace 3d tiskaren a jinych vyrobnich zarizeni a monitoring. Nerealne? Uz to par lidi resi a pripravuji podklady. No bude to zaujimave.

[mcu.cz @mcu_cz]

@chiptronCZ "Pak Pepa Průša mrkne na síťový provoz ..." 🤭 keby sa radsej pozeral na svoje vyrobky a tolko casu co venuje bambu a politike ... je smutne ako dopadol

[mcu.cz @mcu_cz]

@chiptronCZ A nebolo to nahodou o tom, ze ten vyvojar zo svojim sw chcel pouzivat ich cloud? Na neho sa licencia sliceru nevztahuje a podmienky prevadzky cloudu su dane vendorom. To by malo byt iba pre bambu hw a sw. aspin co som videl aj nejak yt videa a fora, ludia si to pletu.

[.NET nanoFramework @nanoFramework]

@Raspberry_Pi RP2040 and RP2040W (Wi-Fi) are now supported by .NET @nanoFramework thanks to the amazing ChibiOS RTOS and HAL. 🚀

Install nanoff, flash your devices and have fun with these amazing devices.

https://t.co/ktQ09716fW

#iot #dotnet #csharp

[mcu.cz @mcu_cz]

@DivokyB @NemecekPanda38 @HrubantJan profi vyroba: laserovy osvit na film, denzita nad 3.5D, jak to bylo pri DTP,
Existuji bezne k dostani A4/3 filmy do inkjet pro screen printing.
Pouzivam UV/CO2 laser pro odstraneni photomasky, leptani a acetonem zmaznu photomask. Je to drahe na vybaveni. 0.1mm spoj v pohode